@10

&TOP OF FILE

    Keystroke sequence:   10
)    Alternate keystrokes: 10

The cursor is moved to the first character in the
file.
@11

&BOTTOM OF FILE

    Keystroke sequence:   11
)    Alternate keystrokes: 11

The cursor is moved past the last character in
the file.
@18

&GO TO LINE NUMBER

    Keystroke sequence:   18
)    Alternate keystrokes: 18

The cursor will be repositioned to the specified
line number of the current window. A prompt box
will request the target line number. Enter any
number from 1 to 32767. If the value is preceded
by a plus (+) or minus (-) sign, the target line
number will be calculated relative to the current
line.
@19

&GO TO COLUMN NUMBER

    Keystroke sequence:   19
)    Alternate keystrokes: 19

The cursor will be repositioned to the specified
column number of the current line. A prompt box
will request the target column number. Enter any
number from 1 to 999. If the value is preceded
by a plus (+) or minus (-) sign, the target
column number will be calculated relative to the
current column.
@20

&GO TO WINDOW

    Keystroke sequence:   20
)    Alternate keystrokes: 20

The cursor will be moved to the current position
in another window on the screen. If only one
window is available, nothing will happen.
Otherwise a menu will appear, showing the
available windows, and the files currently in
each one. Select one of these choices by moving
the selection bar or by pressing the number of
the desired window.
@22

&UNDO LAST DELETION

    Keystroke sequence:   22
)    Alternate keystrokes: 22

The line of text most recently deleted will be
inserted into the current text stream at the
cursor position. Note that this applies only to
complete lines of text, and not to character or
word deletions. By default, 20 lines of deleted
text are stored for possible undeletion. The undo
limit can be adjusted via the Options Load
file menu.
@23

&RESTORE LINE

    Keystroke sequence:   23
)    Alternate keystrokes: 23

The current line of text will be restored to its
appearance just prior to when the cursor was
moved onto the line. The cursor position will
also be restored to the value when it entered the
line.
@34

&SEARCH FOR PATTERN

    Keystroke sequence:   34
)    Alternate keystrokes: 34

The current window will be searched to find a
specified sequence of text. When the pattern is
found, the cursor will be positioned at the
beginning of the pattern, and the matched text
highlighted until the next keystroke.

A prompt box will allow entry of the text
pattern and search options. Enter any text or
control characters just as they would be typed in
the body of the file.
]

Search options control the behavior of the
search. The following options are available:

 U - ignore case (Upper-case) while searching
) B - search Backwards from the cursor
)     position.
) W - search for whole Words only.
) G - search Globally, starting at the
)     beginning of the file (or end, if
)     searching backwards).
) L - search Locally (only within marked block).
) n - search for the nth occurrence of the
)     string (n is an integer).
]

Enter the following sequence of keystrokes to
search for the end of each text line:
<CtrlP><CtrlM><CtrlP><CtrlJ>. This sequence
enters Carriage return/Line feed into the search
pattern.

Note that each pattern must be found within a
single line. No match may span multiple lines.
@35

&SEARCH AND REPLACE

    Keystroke sequence:   35
)    Alternate keystrokes: 35

The current window will be searched for a
specified sequence of text. When the pattern is
found, it will be replaced with another specified
text sequence.

A prompt box will allow entry of the search
text, replacement text, and search options. Enter
any text or control characters just as they would
be typed in the body of the file.
]

Search options control the behavior of the
search. The following options are available:

 U - ignore case (Upper-case) while searching
) B - search Backwards from the cursor
)     position.
) W - search for whole Words only.
) G - search Globally, starting at the extreme
)     end of the file.
) L - search Locally (only within marked block).
) N - do Not prompt for confirmation when the
)     pattern is found.
) n - replace n occurrences of the string
)     (n is an integer).
]

If the N option is not specified, a prompt will
occur each time the search pattern is found. This
prompt will provide the following options:

 Y - replace this text and continue searching.
) N - do Not replace, but continue searching.
) A - replace this text and replace All others
)     without prompting.
) Q - do not replace, and Quit searching.
]

Enter the following sequence of keystrokes to
search for the end of each text line:
<CtrlP><CtrlM><CtrlP><CtrlJ>. This sequence
enters Carriage return/Line feed into the search
pattern.
@36

&SEARCH AND USE MACRO

    Keystroke sequence:   36
)    Alternate keystrokes: 36

The current window will be searched for a
specified sequence of text. When the pattern is
found, the cursor will be repositioned to that
location, and a specified macro will be played
back.
]

A prompt box will allow entry of the search
text, macro selection, and search options. Enter
any text or control characters just as they would
be typed in the body of the file. The macro must
have been defined prior to using the search and
apply macro command.
]

Search options control the behavior of the
search. The following options are available:

 U - ignore case (Upper-case) while searching
) B - search Backwards from the cursor
)     position.
) W - search for whole Words only.
) G - search Globally, starting at the extreme
)     end of the file.
) L - search Locally (only within marked block).
) N - do Not prompt for confirmation when the
)     pattern is found.
) n - apply macro for n occurrences of the
)     search string (n is an integer).
]

If the N option is not specified, a prompt will
occur each time the search pattern is found. This
prompt will provide the following options:

 Y - apply macro and continue searching.
) N - do Not apply macro, but continue searching.
) A - apply macro and apply at All matches
)     without prompting.
) Q - do not apply macro, and Quit searching.
]

Enter the following sequence of keystrokes to
search for the end of each text line:
<CtrlP><CtrlM><CtrlP><CtrlJ>. This sequence
enters Carriage return/Line feed into the search
pattern.
@37

&SEARCH AGAIN

    Keystroke sequence:   37
)    Alternate keystrokes: 37

The previous search operation will be repeated.
This will repeat a plain search, a search and
replace, or a search and apply macro command.
@38

&OPERATING SYSTEM

    Keystroke sequence:   38
)    Alternate keystrokes: 38

Any DOS command or program may be executed. A
prompt box will ask for the name of the command
or program to run. Entering an empty line at the
prompt box will cause a DOS shell to be invoked.
You may execute any sequence of DOS commands from
the shell, and finally return to the editor by
typing Exit.
]

The DOS shell requires that a copy of COMMAND.COM
(or other shell, like 4DOS) be present in the drive and
directory specified in MSDOS's COMSPEC environment
variable.  (This will be true for a PC with a
normal set up.)  Sufficient random-access memory must be
available for the shell and any command that you
specify.

Do not execute any program that becomes memory
resident while within the DOS shell. Do not change
video modes.
@39

&BACKWARD TAB

    Keystroke sequence:   39
)    Alternate keystrokes: 39

The cursor will be moved to the next tab left of
the current position. This command is available
only in fixed tab mode.
@40

&EDIT ANOTHER FILE

    Keystroke sequence:   40
)    Alternate keystrokes: 40

The current window will be cleared, and a prompt
box will ask for the name of another file to
edit. If the current window already holds a file
that has been modified, you will be given the
opportunity to save it.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.

By entering an empty line for the file name, you
can edit a file without specifying a name for it.
A name can be specified later when you want to
write it out to disk.
@41

&FILE QUIT

    Keystroke sequence:   41
)    Alternate keystrokes: 41

The editing session will end and you will return
to DOS. If any windows have been modified, prompt
boxes will appear and you will be given the
opportunity to save each modified file. If you
type <Esc> at any of the prompt boxes, the FILE
QUIT command will be interrupted and you will
return to the current text window.
@42

&READ BLOCK FROM FILE

    Keystroke sequence:   42
)    Alternate keystrokes: 42

A prompt box will ask for the name of a file to
read. This file will be read into the current
window, starting at the current cursor position.
The newly read text will be marked as a block.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.
@43

&SAVE AND CONTINUE EDIT

    Keystroke sequence:   43
)    Alternate keystrokes: 43

The contents of the current window will be saved
to disk, using a file name the same as when the
file was first read. If the file has not been
named, a prompt box will ask for a new name. If
the disk file already exists, a backup copy will
be made before overwriting the existing version.
The cursor will remain in place after the file is
written to disk.
@44

&WRITE BLOCK TO FILE

    Keystroke sequence:   44
)    Alternate keystrokes: 44

The currently marked block will be written to a
disk file. If no block is marked, an error
message will be produced. If the disk file
already exists, you will be given the choice of
overwriting it or appending to it.
@46

&FILE OPEN

    Keystroke sequence:   46
)    Alternate keystrokes: 46

A prompt box will ask for the name of a new file
to read. If another file is already being edited,
the current window will be split in half, and the
new file will be read into the new window.

By specifying a file name that matches an
existing window, you may look at two regions of
the same file. Changes made in one window will
affect all other windows which contain the same
file.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.

By entering an empty line for the file name, you
can edit a file without specifying a name for it.
A name can be specified later when you want to
write it out to disk.
@47

&RESIZE WINDOW

    Keystroke sequence:   47
)    Alternate keystrokes: 47

Use this command to change the height of the
current window. The up and down arrow keys will
move the window dividing lines. Press <Enter>
when the window has the desired size.
@48

&SAVE/SWITCH FILES

    Keystroke sequence:   48
)    Alternate keystrokes: 48

The file in the current window will be stored to
disk. A prompt box will then ask for the name of
another file to edit. The new file will be read
into the current window. All window sizes will
remain the same.
]

When prompted for a file name, you may enter DOS
wildcards or the name of another drive or
subdirectory. In this case, another window will
display the names of all matching files. You can
select from this list by using the cursor keypad,
or by pressing the first letter of the filename
in which you are interested.

By entering an empty line for the file name, you
can edit a file without specifying a name for it.
A name can be specified later when you want to
write it out to disk.
@49

&NEXT WINDOW

    Keystroke sequence:   49
)    Alternate keystrokes: 49

The cursor will be moved to the current position
in the next window down on the screen. If the
cursor is already in the lowest window, it will
move to the topmost window. If there is only one
window, nothing will happen.
@51

&ZOOM WINDOW

    Keystroke sequence:   51
)    Alternate keystrokes: 51

The current window will grow to fill the screen.
Other text windows are kept in memory, but are
not visible until zoom is toggled off. The Next
window and Previous window commands will bring
each window to the forefront in succession. Text
markers and blocks may be accessed as usual in
the hidden windows. The only exception is block
delete: a block will not be deleted from a hidden
window.
]

When zoom is active, a letter Z will appear at the
left edge of the window status line. Toggling
the zoom command again will make all windows
visible.
@52

&BLOCK BEGIN

    Keystroke sequence:   52
)    Alternate keystrokes: 52

The cursor position will become the start of a
marked block.
@53

&BLOCK END

    Keystroke sequence:   53
)    Alternate keystrokes: 53

The cursor position will become the end of a
marked block.
@54

&GO TO START OF BLOCK

    Keystroke sequence:   54
)    Alternate keystrokes: 54

The cursor will be moved to the start of the
current block, whether it is visible or not.
@55

&GO TO END OF BLOCK

    Keystroke sequence:   55
)    Alternate keystrokes: 55

The cursor will be moved to the end of the marked
block, whether it is visible or not.
@56

&BLOCK COPY

    Keystroke sequence:   56
)    Alternate keystrokes: 56

A copy of the marked block will be inserted at
the current cursor position.
@57

&BLOCK MOVE

    Keystroke sequence:   57
)    Alternate keystrokes: 57

The marked block will be removed from its current
location and inserted at the current cursor
position.
@58

&BLOCK DELETE

    Keystroke sequence:   58
)    Alternate keystrokes: 58

The marked block will be deleted from the text
stream. If the block spans more than one line,
the deleted lines may be recovered via the
Undelete command.
@59

&HIDE BLOCK

    Keystroke sequence:   59
)    Alternate keystrokes: 59

The on-screen highlighting of the marked block is
toggled on or off. Blocks can be copied, moved,
or deleted only when the block is visibly marked.
Movement to block start or end is possible even
when the block is not visible.
@82

&LOAD MACROS FROM DISK

    Keystroke sequence:   82
)    Alternate keystrokes: 82

A previously stored file of ET keyboard macros is
loaded into memory. The macro file is a binary
file in a special format used by ET. Macros may be
recorded, edited, and stored to disk from within
ET. Each macro file contains ten macros, each of
which may hold up to 255 keystrokes. ET
automatically loads the macro file ET.MAC, if
found, when the program is started.
@83

&STORE MACROS TO DISK

    Keystroke sequence:   83
)    Alternate keystrokes: 83

The current set of ET keyboard macros is written
to a disk file. A prompt box will ask for a file
name. The macro file is a binary file in a special
format used by ET. Macros may be recorded, edited,
and stored to disk from within ET. Each macro file
contains ten macros, each of which may hold up to
255 keystrokes. ET automatically loads the macro
file ET.MAC, if found, when the program is
started.
@84

&TOGGLE MACRO RECORD

    Keystroke sequence:   84
)    Alternate keystrokes: 84

Any keystrokes entered after this command is
activated are stored within a keyboard macro,
which may be edited and later played back within
ET. To stop macro recording, enter this command a
second time. A prompt box will ask for which of
the ten macros should store the newly recorded
one, and for a descriptive name for the macro.

Each macro can hold up to 255 keystrokes. Macros
can play back other macros. Macros are played
back by pressing one of the installed keystroke
combinations, or by choosing the ET Macro
Playback option from the menu system.
]

One of the macros is somewhat special. This
macro is called the "scrap". Whenever a new macro
is recorded, it writes over the scrap macro. The
current scrap macro can be played back once or
many times using other macro commands.
@104

&GET INFORMATION

    Keystroke sequence:   104
)    Alternate keystrokes: 104

Various facts about ET and the current file are
displayed. Information shown includes the complete
path name of the current file; its size in bytes,
words, and lines; whether it has been
modified since last disk save; the time and date;
available RAM and disk space; the current
directory; and the DOS and ET version numbers.

Some of the statistics that ET presents
take a while to compute. By pressing any key while
the Get Info window is being updated, you can
"short-circuit" the computation of some items.
@106

&TOGGLE INSERT MODE

    Keystroke sequence:   106
)    Alternate keystrokes: 106

When insert mode is active, newly typed text is
inserted into the current text line, pushing
characters to the right of the cursor aside to
make room. When insert mode is off, newly typed
text overwrites existing text. Many commands,
such as block copy and insert line, operate in
insert mode independent of the setting of this
toggle.
@107

&TOGGLE AUTOINDENT MODE

    Keystroke sequence:   107
)    Alternate keystrokes: 107

When autoindent mode is active and the <Enter>
key is pressed, the new line of text will be
indented the same number of spaces as the line
immediately above it. The setting of this toggle
also affects the operation of the paragraph
reformatting command.
@108

&TOGGLE CASE

    Keystroke sequence:   108
)    Alternate keystrokes: 108

The case of the character at the cursor location
will be toggled from upper to lower, or from
lower to upper. If a block is marked and visible,
and the cursor is anywhere within the marked
block, the command will toggle the case of the
entire block.
@109

&LOWER CASE

    Keystroke sequence:   109
)    Alternate keystrokes: 109

The case of the character at the cursor location
will be set to lower-case. If a block is marked
and visible, and the cursor is anywhere within
the marked block, the command will change the
case of the entire block.
@110

&UPPER CASE

    Keystroke sequence:   110
)    Alternate keystrokes: 110

The case of the character at the cursor location
will be set to upper-case. If a block is marked
and visible, and the cursor is somewhere within
the marked block, the command will change the
case of the entire block.
@111

&SET RIGHT MARGIN

    Keystroke sequence:   111
)    Alternate keystrokes: 111

A prompt box will ask for a new value for the
right margin. Entering an empty prompt string will
set the right margin to the current cursor column.
The right margin is used only when Word Wrap mode
is active. When that is so, text entered in a
column beyond the right margin will automatically
be wrapped to the next line. Paragraph formatting
will move words so that lines are as full as
possible within, but not exceeding, the right
margin.
@112

&FORMAT PARAGRAPH

    Keystroke sequence:   112
)    Alternate keystrokes: 112

Format paragraph is available only when Word
Wrap mode is active. Paragraph reformatting will
move words so that lines are as full as possible
within, but not exceeding, the current left and
right margins. If Justify mode is active, the
lines will also be evenly filled with spaces so
that the rightmost word ends on the right margin.

The paragraph reformat is terminated when a blank
line, or a line beginning with a backslash character
(\), is reached.  (The backslash introduces a TeX control
sequence.)
@113

&TOGGLE WORD WRAP

    Keystroke sequence:   113
)    Alternate keystrokes: 113

When Word Wrap mode is active, paragraph
reformatting and automatic word wrap are
available. Otherwise, left and right margin
settings are ignored, and text may be entered in
any column up to the maximum line length.
@114

&SET LEFT MARGIN

    Keystroke sequence:   114
)    Alternate keystrokes: 114

A prompt box will ask for a new value for the
left margin. Entering an empty prompt string will
set the left margin to the current cursor column.

When Word Wrap mode is active, the left margin
controls the leftmost position where text may be
entered. The left margin also controls the
operation of the paragraph formatting command.

The left and right margins can be made visible by
toggling the Tab Line Display.

@115

&DISPLAY TABS

    Keystroke sequence:   115
)    Alternate keystrokes: 115

Toggling Display Tabs ON reserves one line of the
current window for display of tab settings and
margins. The tabs and margins can be active
whether or not the tab line is visible.
@116

&INSERT UNDO BUFFER

    Keystroke sequence:   116
)    Alternate keystrokes: 116

The entire contents of the undo buffer are
inserted into the current text stream, prior to
the current line. This empties the undo buffer,
that is, the operation can be used only once for
any set of deletions.
@117

&TOGGLE JUSTIFY

    Keystroke sequence:   117
)    Alternate keystrokes: 117

When Justify is active, word wrap and paragraph
reformat operations will cause each line to be
filled in with spaces such that the rightmost
non-blank character is exactly on the right
margin.
]

By toggling Justify off, and reformatting lines
or paragraphs, the additional blanks will be
automatically removed from the text. Note that
blanks manually inserted (via the Tab command,
etc.) will also be removed, unless the Compress
Wrap mode is turned off.

ET does not differentiate between "soft"
blanks added during justification and "hard"
blanks manually entered.
@119

&TOGGLE FONT DISPLAY

    Keystroke sequence:   119
)    Alternate keystrokes: 119

When Font Display is enabled, mathematical
formatting for subscripts, superscripts, symbols
and Greek will be displayed on-screen. Although
the control characters that control the
mathematical formatting are not visible, the
cursor can be positioned over a control character,
and it can be deleted if desired. The cursor
becomes a vertical line when positioned on an
invisible control character.

The value of the control character is displayed at
the right hand edge of the window status line when
the cursor is positioned over it.

]

When font display is disabled control characters
will appear in a suitable font on-screen.
@120

&CENTER LINE

    Keystroke sequence:   120
)    Alternate keystrokes: 120

The current line will be centered between the
left and right margins. This command is active
only when Word Wrap mode is on.
@122

&SAVE SETUP

    Keystroke sequence:   122
)    Alternate keystrokes: 122

The toggles, settings, and options are
stored as ET defaults when this command is
executed.  ET.EXE must be present in the default
directory or in the installed home directory.
@124

&FLUSH UNDO BUFFER

    Keystroke sequence:   124
)    Alternate keystrokes: 124

The contents of the undo buffer will be deleted,
freeing up whatever memory is being used. This
command is useful in combination with the Insert
Undo Buffer command.
@127

&CHANGE ACTIVE DIRECTORY

    Keystroke sequence:   127
)    Alternate keystrokes: 127

The current default drive or directory may be
changed using this command. Entering wildcards
will cause a directory window to appear showing
possible choices.

Files previously opened in other directories will
be properly accessed even after the active
directory is changed.
@128

&FILE DIRECTORY

    Keystroke sequence:   128
)    Alternate keystrokes: 128

Use this command to browse through a file
directory. Use standard DOS pathname and wildcard
notation to specify a file mask for the directory.
@133

&SET UNDO LIMIT

    Keystroke sequence:   133
)    Alternate keystrokes: 133

This specifies the maximum number of lines of
deleted text that will be stored in the Undo
buffer. If Undo limit is 10, and you delete 15
lines, the first five lines deleted will be lost.
Whenever lines are Undeleted, that space is
recovered for the undo buffer to reuse.
@134

&TOGGLE TAB EXPANSION

    Keystroke sequence:   134
)    Alternate keystrokes: 134

When tab expansion is ON, any tabs encountered
upon read-in of a file are expanded into spaces,
using a tab spacing that you specify. If tab
expansion is OFF, ET leaves the tabs
intact. However, ET does not expand tabs
as it displays them, so these will be displayed
on the screen as I.
@135

&SET FILE EXTENSION

    Keystroke sequence:   135
)    Alternate keystrokes: 135

If you edit many files with the same extension,
such as .DOC, you should enter that value for the
default extension. ET will automatically
supply the default extension whenever you respond
to a filename prompt without entering an
extension. The extension you enter should not
include a period or any DOS wildcards, and is
limited to three characters. The standard setting
is .ET.
@136

&SET TABS

    Keystroke sequence:   136
)    Alternate keystrokes: 136

The tab settings will be initialized based on the
contents of the current line of text. The start
of each blank-delimited word will set a tab at
that column. Any other tabs will be cleared. By
using this command in concert with the Put Tabs
command, you can store a custom tab line as part
of a document and easily use it later.

You can return to the default evenly spaced tabs
by activating the Options Tabs Restore even
menu selections.
@137

&SET TAB SIZE

    Keystroke sequence:   137
)    Alternate keystrokes: 137

By default, a tab is placed after every eight
columns of text. This tab size is also used when
files containing tabs are read into ET.
Change the tab size and use the Restore even
command to initialize a different set of regularly
spaced tabs.
@138

&PUT TABS

    Keystroke sequence:   138
)    Alternate keystrokes: 138

The tab settings are stored into the current
window as a formatted text line. The line begins
with a TeX comment character (%), and
will be ignored during printing by TeX. Use this command
in concert with the Set tabs command to store
a custom tab line as part of a document for later
use. (This is a holdover from a previous
editor.  But it is handy if you want to format a
file in a convenient way.)
@139

&EDIT TABS

    Keystroke sequence:   139
)    Alternate keystrokes: 139

Tab positions can be interactively edited using
this command. The cursor will be moved to the
current window's tab line display. Use the cursor
keys or the tab key to move along the tab line.
Pressing the space bar will toggle a tab setting
on or off, pressing the <Ins> key will add a tab,
pressing the <Del> key will delete a tab at the
cursor position. Press <Enter> when editing is
complete, or <Esc> to undo any changes made.
@140

&SET TEMPORARY MARGIN

    Keystroke sequence:   140
)    Alternate keystrokes: 140

The current left margin will be moved to the right
by one tab stop. This is useful in making indented
lists. The temporary margin will remain in force
until you leave the current paragraph.

The temporary margin is indicated by a right
pointing arrow on the window tab display.
@141

&FORMAT BLOCK

    Keystroke sequence:   141
)    Alternate keystrokes: 141

Paragraph formatting will be applied to all
lines of text in the currently marked block. The
block must be highlighted, and the cursor must be
somewhere within the block, or an error message
will be produced.
@142

&FILE CLOSE

    Keystroke sequence:   142
)    Alternate keystrokes: 142

The current text window will be cleared. If it
has been modified since being saved to disk, you
will be given the opportunity to save it. The
window will then be closed. If the window is the
only one on the screen, you will return to the
ET menu system.
@143

&SET MARKER

This command stores a record of the current cursor
position to which you can easily return later.
ET supports up to ten text markers, which
are labeled with the numbers 0-9 when they are
placed in the text. Shortcut commands for using
each of the ten markers are presented on a
following screen.

The text marker display writes over the character
where it is placed. It does not affect the actual
text, but merely hides it.
]

When a marker is set from the menu system, another
menu will appear showing which markers are already
in use. Redefining an existing marker erases the
previously stored position. Defining a marker at
the same position where it is currently located
has the effect of erasing it.

The following screen provides shortcut keystrokes
for setting text markers without using menus.
]

The following commands will set any of the
markers without using a menu.

)Marker 0   Main: 62    Alternate: 62
)Marker 1   Main: 63    Alternate: 63
)Marker 2   Main: 64    Alternate: 64
)Marker 3   Main: 65    Alternate: 65
)Marker 4   Main: 66    Alternate: 66
)Marker 5   Main: 67    Alternate: 67
)Marker 6   Main: 68    Alternate: 68
)Marker 7   Main: 69    Alternate: 69
)Marker 8   Main: 70    Alternate: 70
)Marker 9   Main: 71    Alternate: 71
@144

&JUMP TO MARKER

This command moves the cursor to the position of a
previously stored text marker. If the marker has
not been set, an error will occur. ET
supports up to ten text markers, which are labeled
with the numbers 0-9 when they are placed in the
text.

When you jump to a marker from the menu system,
another menu will appear showing which markers
have previously been set.

The following screen provides shortcut keystrokes
for jumping to text markers without using menus.
]

The following commands will jump to any of the
markers without using a menu.

)Marker 0   Main: 72    Alternate: 72
)Marker 1   Main: 73    Alternate: 73
)Marker 2   Main: 74    Alternate: 74
)Marker 3   Main: 75    Alternate: 75
)Marker 4   Main: 77    Alternate: 77
)Marker 5   Main: 77    Alternate: 77
)Marker 6   Main: 78    Alternate: 78
)Marker 7   Main: 79    Alternate: 79
)Marker 8   Main: 80    Alternate: 80
)Marker 9   Main: 81    Alternate: 81
@145

&PLAYBACK MACRO

This command will play back a previously recorded
macro. A menu showing the name of all macros will
appear; you should choose the one desired.

The following screen gives shortcut commands which
allow you to playback macros without using the
menu system.  In the distribution version of ET,
the keyboard assignments and the default
definition of the macros assume that macro 7
will set up a new displayed equation.
]

The following commands will playback a macro
without using the menu system:

)Macro 1    Main: 85    Alternate: 85
)Macro 2    Main: 86    Alternate: 86
)Macro 3    Main: 87    Alternate: 87
)Macro 4    Main: 88    Alternate: 88
)Macro 5    Main: 89    Alternate: 89
)Macro 6    Main: 90    Alternate: 90
)Macro 7    Main: 91    Alternate: 91
)Macro 8    Main: 92    Alternate: 92
)Macro 9    Main: 93    Alternate: 93
@146

&TOGGLE FIXED TABS

    Keystroke sequence:   146
)    Alternate keystrokes: 146

When fixed tabs are ON, tab positions are taken
from a table of columns that you can set to even
spacing or customize through various tab
commands. When fixed tabs are OFF, tab positions
are based on the contents of the text surrounding
the current line, just like the Turbo Pascal
editor.
@147

&SET TEMPORARY MARGIN

    Keystroke sequence:   147
)    Alternate keystrokes: 147

The current cursor column will be assigned as the
temporary left margin. If the cursor is beyond the
right margin, an error will occur.
@148

&SET HOME DIRECTORY

    Keystroke sequence:   148
)    Alternate keystrokes: 148

ET uses several files in its operation.
These contain the
default macros, and this help file. In order to
run ET from a drive or directory other than
where these files are located, you will need to
set up a Home Directory. The home directory
specifies the location of the optional ET
support files on your system.
]

The following files should be kept in that
directory:

)  ET.HLP   ET.MAC

ET will operate without the use of these
files, but in that case certain program features
will not be available.

After the home directory is set, it can be saved
with ET's Save Setup command.
@150

&EDIT MACRO

    Keystroke sequence:   150
)    Alternate keystrokes: 150

Macros recorded within ET can be edited on
a character by character basis using the built-in
macro editor.

First, a prompt box will ask for a new name for
the macro, which you can accept as is, or change.
]

The macro will appear in another window. It can
be edited using the cursor keys, and the <Del>
or <Backspace> keys. Most characters you type will
be inserted literally into the macro. <CtrlBksp>
will delete the macro. <Enter> will end the
session in the macro editor. <Esc> will undo any
changes made to the macro. In case you need to
enter any of these special keys as part of the
macro, press the <ScrollLock> key to enter
Literal mode. In this mode, all keystrokes will
be inserted into the macro without any
interpretation.
@151

&WRITE TO FILE (Save file As ...)

    Keystroke sequence:   151
)    Alternate keystrokes: 151

This command will store all text in the current
window to any file that you name. When you are
editing in a window that has not previously been
named, you can use this command to assign a name
to the window. Using it in an already-named window
will cause the name of that window, and all other
windows sharing the same text stream, to be
updated to the new name.
@152

&TOGGLE KEY HELP

    Keystroke sequence:   152
)    Alternate keystrokes: 152

When Key Help is ON, ET will display the
command sequences that correspond to each menu
selection while you are browsing through the menu
system. This can serve to familiarize you with
the quick keystrokes and speed up your editing.
@153

&PREVIOUS WINDOW

    Keystroke sequence:   153
)    Alternate keystrokes: 153

The cursor will be moved to the current position
in the next window up the screen. If the cursor is
already in the topmost window, it will move to the
bottom window. If there is only one window,
nothing will happen.
@154

&NEXT SENTENCE

    Keystroke sequence:   154
)    Alternate keystrokes: 154

The cursor will be moved to the beginning of the
next sentence. Sentences are delimited by periods,
semicolons, and other common punctuation marks, as
well as by blank lines and lines beginning with
the ET format character (@).  (This last is
a holdover from a previous version.)
@155

&PREVIOUS SENTENCE

    Keystroke sequence:   155
)    Alternate keystrokes: 155

The cursor will be moved to the beginning of the
previous sentence. Sentences are delimited by
periods, semicolons, and other common punctuation
marks, as well as by blank lines and lines
beginning with the ET format character (@).
(This last is a holdover from a previous
version.)
@156

&RESTORE EVEN TABS

    Keystroke sequence:   156
)    Alternate keystrokes: 156

Tabs will be set on an even spacing as determined
by the current default tab spacing. Any other tab
settings will be cleared.
@161

&SELECT SUPERSCRIPT

    Keystroke sequence:   161
)    Alternate keystrokes: 161

If a block is marked and visible, ET will
convert the block to superscript.

If no block is marked, ET will start a new empty
superscript at the current cursor position, and
will position the cursor in the superscript.  An
up-arrow will appear on the screen at the
position of the superscript.  Newly entered text
will be superscript, until you move the cursor
outside the superscript.

@162

&SELECT SUBSCRIPT

    Keystroke sequence:   162
)    Alternate keystrokes: 162

If a block is marked and visible, ET will
convert the block to subscript.

If no block is marked, ET will start a new empty
subscript at the current cursor position, and
will position the cursor in the subscript.  A
down-arrow will appear on the screen at the
position of the subscript. Newly entered text
will be subscript, until you move the cursor
outside the subscript.

@163

&SELECT MATHEMATICS MODE

    Keystroke sequence:   163
)    Alternate keystrokes: 163

If a block is marked and visible, ET will place
begin math and end math symbols around the block.
These symbols will be translated to TeX's symbol
for begin and end of math, viz. `$', by the
ETTOTEX program, when an ET file is converted to
TeX.

If no block is marked, ET will place the symbols
at the current cursor position,
and position the cursor between the two.
@167
&TOGGLE USE OF LARGE FONT

    Keystroke sequence:   167
)    Alternate keystrokes: 167

You have the choice of two sizes of font for
the screen. This is useful for legibility if
the video card for your system gives you more
than 330 graphics lines on the screen (EGA,
VGA and Hercules).

When Use of Large Font is OFF, ET uses a font
that is 8 pixels high. But when this setting
is ON, and your video card gives you more
than 330 lines, then ET uses a font that is
11 pixels high (this is the normal sized font
on an EGA card).
@170

&TOGGLE USE VGA HIRES GRAPHICS

    Keystroke sequence:   170
)    Alternate keystrokes: 170

If the video card is a VGA, then ET can use
either a medium resolution graphics mode or a
high resolution mode (350 or 480 lines). This
toggle switches between the two.
@168

&MARGIN RELEASE

    Keystroke sequence:   168
)    Alternate keystrokes: 168

Setting Margin Release ON allows you to type
beyond the left and right margins while Word Wrap
mode is active. Margin release remains effective
until the cursor is moved to another line. It can
also be toggled off at any time.
@169

&SPELL CHECK

The spelling checker is not available in this
version of ET.
@171

&TOGGLE TAB WRITING

    Keystroke sequence:   171
)    Alternate keystrokes: 171

By default, ET does not write tab
characters in files saved from the editor. If Tab
Writing is activated, ET will translate
sequences of spaces to tabs in order to save disk
space for the output file. Tabs are computed using
the fixed spacing currently set for fixed tabs.
Multiple spaces found within pairs of single or
double quotes (as used in Pascal or C source code)
will not be converted to tabs.

Tab writing is saved as a ET default.
@172

&TOGGLE WRAP COMPRESSION

    Keystroke sequence:   172
)    Alternate keystrokes: 172

By default, ET compresses extra spaces out
of any line before it is wrapped. This feature is
required in order to "unjustify" text that has
previously been right justified. However, in some
cases the compression will remove desired spaces,
as in the case of aligned columns of figures, for
a non-TeX file.

When this toggle is OFF, extra spaces will not be
removed from lines being wrapped. Wrap
compression is saved as a ET default.
@173

&TOGGLE INITIAL ZOOM STATE

    Keystroke sequence:   173
)    Alternate keystrokes: 173

The state of this toggle determines ET's
default behavior when more than one window is on
the screen. When Initial Zoom State is OFF,
multiple windows will appear simultaneously on
the screen, that is, they will not be zoomed.

When Initial Zoom State is ON, multiple windows
will be zoomed. The last file opened will be
visible on the screen, and others will be hidden
behind it.

Initial Zoom State is saved as a ET
default.

The normal zoom window command may be used at any
time, regardless of Initial Zoom State.
@174

&HELP SUMMARY

ET provides help in several ways. This
section describes how to use the help system.

Whenever the ET help system is on screen,
you can use the <PgUp> and <PgDn> keys to
move from one screen to another. <Home> and
<End> will take you to the first and last pages
of the section. Press <Esc> when you are done
using help.
]

The ET menu system is available at any
time by pressing 201. Most of ET's
commands may be selected from the menus. Within
the menu system, you may activate "Key help" by
choosing Setup Display options Key help. With
Key help activated, the quick keystrokes that
activate each command will be displayed on the top
row of the screen while the selection bar is
positioned over that menu item.

Pressing <F1> while within the ET menu
system or within any prompt box will bring up a
window containing more detailed help regarding the
selected command. Pressing <F1> while you are
entering text will bring up a menu of help topics.
@175

&HELP SUMMARY

ET provides help in several ways. This
help section describes how to use the help
system.

Whenever the ET help system is on screen,
you can use the <PgUp> and <PgDn> keys to
move from one screen to another. <Home> and
<End> will take you to the first and last pages
of the section. Press <Esc> when you are done
using help.
]

The ET menu system is available at any
time by pressing 201. Most of ET's
commands may be selected from the menus. Within
the menu system, you may activate "Key help" by
choosing Setup Display options Key help. With
Key help activated, the quick keystrokes that activate
each command will be displayed on the top
row of the screen while the selection bar is
positioned over that menu item.

Pressing <F1> while within the ET menu
system or within any prompt box will bring up a
window containing more detailed help regarding the
selected command. Pressing <F1> while you are
entering text will bring up a menu of help topics.
]

&Help and Status Keystrokes

)Show help menu
)    Main: 174    Alternate: 174
)Show help summary
)    Main: 50    Alternate: 50
)Activate menu system
)    Main: 201    Alternate: 201
)Show system and file information
)    Main: 104    Alternate: 104
)Show available memory
)    Main: 105    Alternate: 105
@176

&Cursor Movement

Character left
)    Main: 0    Alternate: 0
)Character right
)    Main: 1    Alternate: 1
)Word left
)    Main: 2    Alternate: 2
)Word right
)    Main: 3    Alternate: 3
)Line up
)    Main: 4    Alternate: 4
)Line down
)    Main: 5    Alternate: 5
)Scroll up
)    Main: 6    Alternate: 6
)Scroll down
)    Main: 7    Alternate: 7
)Page up
)    Main: 9    Alternate: 9
)Page down
)    Main: 8    Alternate: 8
)Top of file
)    Main: 10    Alternate: 10
)Bottom of file
)    Main: 11    Alternate: 11
)Beginning of line
)    Main: 12    Alternate: 12
)End of line
)    Main: 13    Alternate: 13
)Top of screen
)    Main: 14    Alternate: 14
)Bottom of screen
)    Main: 15    Alternate: 15
@177

&Quick Movement Commands

Go to line
)    Main: 18    Alternate: 18
)Go to column
)    Main: 19    Alternate: 19
)Go to window
)    Main: 20    Alternate: 20
)Previous cursor position
)    Main: 21    Alternate: 21
)Up to equal indent
)    Main: 16    Alternate: 16
)Down to equal indent
)    Main: 17    Alternate: 17
)Next sentence
)    Main: 154    Alternate: 154
)Previous sentence
)    Main: 155    Alternate: 155
]

&Text Markers

Set a marker by menu
)    Main: 143    Alternate: 143
)Jump to marker by menu
)    Main: 144    Alternate: 144
)Toggle marker display
)    Main: 61    Alternate: 61
)Set marker 0
)    Main: 62    Alternate: 62
)Set marker 1
)    Main: 63    Alternate: 63
)Set marker 2
)    Main: 64    Alternate: 64
)Set marker 3
)    Main: 65    Alternate: 65
)Set marker 4
)    Main: 66    Alternate: 66
)Set marker 5
)    Main: 67    Alternate: 67
)Set marker 6
)    Main: 68    Alternate: 68
)Set marker 7
)    Main: 69    Alternate: 69
)Set marker 8
)    Main: 70    Alternate: 70
)Set marker 9
)    Main: 71    Alternate: 71
)Jump marker 0
)    Main: 72    Alternate: 72
)Jump marker 1
)    Main: 73    Alternate: 73
)Jump marker 2
)    Main: 74    Alternate: 74
)Jump marker 3
)    Main: 75    Alternate: 75
)Jump marker 4
)    Main: 76    Alternate: 76
)Jump marker 5
)    Main: 77    Alternate: 77
)Jump marker 6
)    Main: 78    Alternate: 78
)Jump marker 7
)    Main: 79    Alternate: 79
)Jump marker 8
)    Main: 80    Alternate: 80
)Jump marker 9
)    Main: 81    Alternate: 81
@178

&Text Insertion and Deletion

Undo last deletion
)    Main: 22    Alternate: 22
)Restore line
)    Main: 23    Alternate: 23
)Insert undo buffer
)    Main: 116    Alternate: 116
)Tab
)    Main: 24    Alternate: 24
)Backward Tab
)    Main: 39    Alternate: 39
)New line
)    Main: 26    Alternate: 26
)Insert line
)    Main: 27    Alternate: 27
)Insert control character
)    Main: 25    Alternate: 25
)Delete current character
)    Main: 28    Alternate: 28
)Delete character left
)    Main: 29    Alternate: 29
)Delete word
)    Main: 30    Alternate: 30
)Delete to end of line
)    Main: 31    Alternate: 31
)Delete line
)    Main: 32    Alternate: 32
)Delete line (no undo)
)    Main: 33    Alternate: 33
)Abort command (1 char)
)    Main: 202    Alternate: 202
@179

&Search and Replace

Search for pattern
)    Main: 34    Alternate: 34
)Search and replace
)    Main: 35    Alternate: 35
)Search and playback macro
)    Main: 36    Alternate: 36
)Search again
)    Main: 37    Alternate: 37
@180

&Files

Edit another file in same window
)    Main: 40    Alternate: 40
)Open file in new window
)    Main: 46    Alternate: 46
)Open unnamed file in new window
)    Main: 200    Alternate: 200
)Abandon file
)    Main: 41    Alternate: 41
)Read file into window
)    Main: 42    Alternate: 42
)Save and continue edit
)    Main: 43    Alternate: 43
)Save and exit to DOS
)    Main: 45    Alternate: 45
)Write to named file.  (Save file As ...)
)    Main: 151    Alternate: 151
)Save/Switch files
)    Main: 48    Alternate: 48
@181

&Windows

Open file in new window
)    Main: 46    Alternate: 46
)Open unnamed file in new window
)    Main: 200    Alternate: 200
)Close window
)    Main: 142    Alternate: 142
)Resize window
)    Main: 47    Alternate: 47
)Next window
)    Main: 49    Alternate: 49
)Previous window
)    Main: 153    Alternate: 153
)Zoom window
)    Main: 51    Alternate: 51
@182

&Block Commands

Begin block
)    Main: 52    Alternate: 52
)End block
)    Main: 53    Alternate: 53
)Go to start of block
)    Main: 54    Alternate: 54
)Go to end of block
)    Main: 55    Alternate: 55
)Copy block
)    Main: 56    Alternate: 56
)Move block
)    Main: 57    Alternate: 57
)Delete block
)    Main: 58    Alternate: 58
)Hide block
)    Main: 59    Alternate: 59
)Mark current word
)    Main: 60    Alternate: 60
)Write block to file
)    Main: 44    Alternate: 44
@183

&Text Formatting

Format paragraph
)    Main: 112    Alternate: 112
)Format block
)    Main: 141    Alternate: 141
)Center line
)    Main: 120    Alternate: 120
)Margin release
)    Main: 168    Alternate: 168
)Toggle case
)    Main: 108    Alternate: 108
)Lower case
)    Main: 109    Alternate: 109
)Upper case
)    Main: 110    Alternate: 110
@184

&Tabs

)Tab
)    Main: 24    Alternate: 24
)Backward Tab
)    Main: 39    Alternate: 39
)Set tabs
)    Main: 136    Alternate: 136
)Put tabs
)    Main: 138    Alternate: 138
)Set tab size
)    Main: 137    Alternate: 137
)Edit tabs
)    Main: 139    Alternate: 139
)Tab temporary margin
)    Main: 140    Alternate: 140
)Set temporary margin
)    Main: 147    Alternate: 147
)Restore even tabs
)    Main: 156    Alternate: 156
@185

&Utility Commands

)Change active directory
)    Main: 127    Alternate: 127
)Directory
)    Main: 128    Alternate: 128
)Operating system
)    Main: 38    Alternate: 38
@186

&Settings and Toggles

Toggle insert mode
)    Main: 106    Alternate: 106
)Toggle autoindent mode
)    Main: 107    Alternate: 107
)Toggle word wrap
)    Main: 113    Alternate: 113
)Toggle wrap compression
)    Main: 172    Alternate: 172
)Toggle tab line display
)    Main: 115    Alternate: 115
)Toggle justify
)    Main: 117    Alternate: 117
)Toggle font display
)    Main: 119    Alternate: 119
)Toggle fixed tabs
)    Main: 146    Alternate: 146
)Toggle tab expansion
)    Main: 134    Alternate: 134
)Toggle tab writing
)    Main: 171    Alternate: 171
)Toggle key help
)    Main: 152    Alternate: 152
)Set left margin
)    Main: 114    Alternate: 114
)Set right margin
)    Main: 111    Alternate: 111
)Set undo limit
)    Main: 133    Alternate: 133
)Set default file extension
)    Main: 135    Alternate: 135
)Toggle large font
)    Main: 167    Alternate: 167
)Toggle VGA HiRes
)    Main: 170    Alternate: 170
)Toggle VESA
)    Main: 197    Alternate: 197
)Set home directory
)    Main: 148    Alternate: 148
)Save setup
)    Main: 122    Alternate: 122
@187

&Spell Checking

There is no spelling checker in this version
of ET.
@188

&Macros

Load macros from disk
)    Main: 82    Alternate: 82
)Store macros to disk
)    Main: 83    Alternate: 83
)Record macro
)    Main: 84    Alternate: 84
)Edit macro
)    Main: 150    Alternate: 150
)Playback macro by menu
)    Main: 145    Alternate: 145
)Playback Macro 1
)    Main: 85    Alternate: 85
)Playback Macro 2
)    Main: 86    Alternate: 86
)Playback Macro 3
)    Main: 87    Alternate: 87
)Playback Macro 4
)    Main: 88    Alternate: 88
)Playback Macro 5
)    Main: 89    Alternate: 89
)Playback Macro 6
)    Main: 90    Alternate: 90
)Playback Macro 7
)    Main: 91    Alternate: 91
)Playback Macro 8
)    Main: 92    Alternate: 92
)Playback Macro 9
)    Main: 93    Alternate: 93
)Playback scrap macro
)    Main: 94    Alternate: 94
)Playback scrap macro 1 time
)    Main: 95    Alternate: 95
)Playback scrap macro 2 times
)    Main: 96    Alternate: 96
)Playback scrap macro 3 times
)    Main: 97    Alternate: 97
)Playback scrap macro 4 times
)    Main: 98    Alternate: 98
)Playback scrap macro 5 times
)    Main: 99    Alternate: 99
)Playback scrap macro 6 times
)    Main: 100    Alternate: 100
)Playback scrap macro 7 times
)    Main: 101    Alternate: 101
)Playback scrap macro 8 times
)    Main: 102    Alternate: 102
)Playback scrap macro 9 times
)    Main: 103    Alternate: 103
@189

&Mathematics Commands

)Greek/symbol
)    Main: 191    Alternate: 191
)Make previous character Greek/symbol
)    Main: 192    Alternate: 192
)Select Superscript
)    Main: 161    Alternate: 161
)Make previous character superscript
)    Main: 195    Alternate: 195
)Select Subscript
)    Main: 162    Alternate: 162
)Make previous character subscript
)    Main: 194    Alternate: 194
)Select Mathematics
)    Main: 163    Alternate: 163
)Make previous character math mode
)    Main: 196    Alternate: 196
)Open fraction
)    Main: 193    Alternate: 193
]
@190

&Function Keys

|
@191

&GREEK/SYMBOL

    Keystroke sequence:   191
)    Alternate keystrokes: 191

Enter a character.  It will be
converted to an equivalent Greek
character [e.g. 'a' to  (alpha)] or
to a symbol.
@192

&LAST CHARACTER GREEK/SYMBOL

    Keystroke sequence:   192
)    Alternate keystrokes: 192

The character to the left of the
cursor will be converted to
Greek or symbol.
@193

&OPEN FRACTION

    Keystroke sequence:   193
)    Alternate keystrokes: 193

A built-up fraction will be
inserted at the cursor, with
empty numerator and denominator.
The cursor will be placed ready
to type the numerator.
@194

&LAST CHARACTER SUBSCRIPT

    Keystroke sequence:   194
)    Alternate keystrokes: 194

The character to the left of the
cursor will be made into a subscript.
@195

&LAST CHARACTER SUPERSCRIPT

    Keystroke sequence:   195
)    Alternate keystrokes: 195

The character to the left of the
cursor will be made into a superscript.
@196

&LAST CHARACTER MATH MODE

    Keystroke sequence:   196
)    Alternate keystrokes: 196

Characters to indicate the start and
end of math mode will be placed round
the character to the left of the
cursor.
@197

&TOGGLE USE OF VESA GRAPHICS, WHEN POSSIBLE

    Keystroke sequence:   197
)    Alternate keystrokes: 197

If the video card and BIOS support accessing
Super VGA modes through the VESA standard, then
ET can use them. Depending on the hardware,
screen resolutions of up to 1280x1024 are
possible.

The disadvantage of these modes is that in
Windows 95 you cannot switch to another program
by the use of alt/tab if VESA graphics is used.
So it is useful to toggle between the high
resolution VESA modes and the regular VGA modes.
@200

&NEW FILE

    Keystroke sequence:   200
)    Alternate keystrokes: 200

A new window will be opened for editing
a blank unnamed file.

