/*
 * Copyright (c) 1990-2011 QoSient, LLC
 * All rights reserved.
 *
 * Permission to use, copy, modify, and distribute this software and
 * its documentation for any purpose and without fee is hereby granted,
 * provided that the above copyright notice appear in all copies and
 * that both that copyright notice and this permission notice appear
 * in supporting documentation, and that the name of QoSient not be
 * used in advertising or publicity pertaining to distribution of the
 * software without specific, written prior permission.
 *
 * QOSIENT, LLC DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
 * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS, IN NO EVENT SHALL QOSIENT, LLC BE LIABLE FOR ANY
 * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
 * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
 * CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

Argus Frequently Asked Questions

General
   1.1    What is Argus?

Argus Mailing List
   2.1    Where is the Argus mailing list?
   2.2    How do I join the Argus mailing list?
   2.3    Is there a mailing list archive?

Argus Source Code
   3.1    What is the current version of Argus?
   3.2    Where can I get Argus-3.0?
   3.3    Who owns Argus-3.0?
   3.4    Is Argus-3.0 an open source project?
   3.5    What type of license is Argus distributed under?
   3.6    Can I get involved in Argus development?

Bug Reporting
   4.1    How do I report bugs?

History
   5.1    Where did Argus start?
   5.2    How many versions of Argus are there?
   5.3    Is Argus-3.0 a significant change to Argus?

Portability
   6.1    What platforms does Argus run on?
   6.2    What other programs to I need to compile Argus?

Building Argus
   7.1    How do I compile Argus?

Installing Argus
   8.1    How do I install Argus?


Configuring Argus
   9.1    How do I configure Argus?
   9.2    Are there sample configurations?
   9.3    Can I configure argus to write output to more than one file?


Running Argus
   10.1   How do I run Argus?
   10.2   Do I need to be root to run Argus?
   10.3   Can I have Argus start at boot time?
   10.4   What are some simple examples to show me how to run Argus?
   10.5   How do you run Argus on your systems?


Security Considerations
   11.1   Is there any type of access control for a remote Argus?
   11.2   Where can I get tcp-wrappers()?
   11.3   Is there any confidentiality protection for Argus data on the wire?
   11.4   Where can I get SASL?


Argus Client Programs
   12.1   What is ra()?
   12.2   What is racount()?
   12.3   What is rasort()?
   12.4   What is raxml()?
   12.5   What is ramon()?
   12.6   What is rapath?
   12.7   What is ragator?
   12.8   What is ragrep?
   12.9   What is rasrvstats?
   12.10  What is ratemplate?


Problems
   13.1   I don't think Argus is auditing all the traffic.  What could be wrong?


Audit Management
   14.1   Can I compress Argus log files?
   14.2   Can I process/archive the Argus output file while Argus is running?
   14.3   Can you suggest a daily log reporting configuration?
   14.4   What about storing Argus logs in a database?


General

1.1. What is Argus?
      Argus is a Real Time Flow Monitor that is designed to
      perform comprehensive IP network traffic auditing.

     ARGUS stands for Audit Record Generation and Usage System.


Argus Mailing List

2.1. Where is the Argus mailing list?
      There are currently 3 argus mailing lists.

      argus-announce@qosient.com      is used to send update notices, bug
                                      discoveries, major changes to argus.

      argus-user@qosient.com          is used to discuss the use of argus
                                      tips, contributed software, etc....

      argus-info@lists.andrew.cmu.edu this is the developers mailing list. 


2.2. How do I join the Argus mailing list?
      To join the any of the argus mailing lists, go to
      http://qosient.com/argus/mailinglists.htm and follow the directions.


2.3. Is there a mailing list archive?
      All of the lists are archived, and the developers list is archived at
      http://www.theorygroup.com/Archive/argus


Argus Source Code

3.1  What is the current version of Argus?
      Argus-3.0.0

3.2  Where can I get Argus-3.0?
      Go to http://qosient.com/argus/downloads.htm to get the version
      that you are interested in.

3.3  Who owns Argus-3.0?
      All rights to Argus-3.0 are held by QoSient, LLC, a Delaware
      limited liability corporation that is located in New York, New York.

3.4  Is Argus-3.0 an open source project?
      Yes. The Argus-3.0 effort is intended to be "open source" in
      the sense defined by the Open Source Initiative. Please see
      http://www.opensource.org for details.

3.5  What type of license is Argus distributed under?
      Argus is distributed under the GNU-Public-License.

      This basically means you have a lot of freedom to do what you
      want with Argus-3.0 source code, but there are some restrictions
      especially in the area of warranties and liabilities.  These
      restrictions are are spelled out in detail in the LICENSE file
      in the main distribution.

      If you are interested in using Argus, but the current open
      source license presents issues , contact argus@qosient.com to
      discuss other licensing options that may fit.


3.6  Can I get involved in Argus development?
      Absolutely!  Argus source will be accessible using CVS early in 2001.
      Join the mailing list to get all the details.


Bug Reporting

4.1  How do I report bugs?
      Use the tool ./bin/argusbug to send your bug report
      to the Argus mailing list.  Argusbug will present you
      with a bug reporting form, that includes some system
      information.  If you are unhappy providing the information
      supplied by Argusbug, you are free to delete it.

      Send any comments/fixes/opinions/whatever to the
      mailing list.  Someone will send a reply.


History

5.1  Where did Argus start?
      Argus got its unofficial start at the Georgia Institute
      of Technology, in 1988.  It officially started at Carnegie
      Mellon's Software Engineering Institute (SEI), in 1990, and
      was released into the public domain as Argus-1.5, in early 1996. 

5.2  How many versions of Argus are there?
      There have been 8 releases of Argus, 1.5, 1.7beta, 1.7,
      1.8, 1.8.1, 2.0, 2.0.1 and 2.0.2.  9 including this one.

5.3  Is Argus-3.0 a significant change to Argus?
      Yes!!!  Although the basic concepts are the same, 
      Argus-3.0 is not compatible to previous versions
      of Argus.  Please see the CHANGES document that is
      found in ./docs/CHANGES for details.


Portability

6.1  What platforms does Argus run on?
      Argus is developed on Mac OS X, Linux and FreeBSD, and is
      tested extensively on OpenBSD, NetBSD and Solaris.  It has
      been ported to IRIX, AIX, HP-UX, CrayOS, OpenWRT, Tilera,
      and should port easily to any Unix operating system.

      Because Argus uses libpcap as its packet capture interface,
      Argus, in its current form, can only be ported to systems
      that support libpcap.
  
      If you do port Argus to another platform, please send your
      diffs to the mailing list, and we'll incorporate them into the
      release.

6.2  What other programs to I need to compile Argus?
      Argus requires the GNU programs bison(), and its companion flex().
      Argus can use tcp_wrappers and SASL but these are not required.


Building Argus

7.1  How do I compile Argus?
      Building specifics for Argus are described in the ./INSTALL file.
      The quick method is:

         % ./configure
         % make


Installing Argus

8.1  How do I install Argus?
      Detail installation instructions are in the ./INSTALL file.

      If you've got the RPM binary version, type "rpm -Uvh Argus*.rpm".
      This will install everything.  The only thing you will need to
      do is edit /etc/argus.conf for your specific sites needs, and
      then your ready to go.

      If you've got the source tarball, then "make install" will do
      most everything for you.  If you are concerned about how Argus
      will install itself, read on.

      Argus does not have any installation retrictions, so you can
      install Argus anywhere.  The makefile that is generated by
      ./configure supports "make install".  To review where this
      will install argus:

         make -n install

      If these are cool, then let the Makefile do the installation.
      On most systems the binaries will go into /usr/local/[s]bin, and
      the man pages will go in /usr/local/man.  The docs will go in
      /usr/share/docs, if the system supports it, if not they will
      not be installed.

      If you plan on running Argus as a system daemon, then you should
      install an argus configuration file as /etc/argus.conf.  This
      provides a single point of configuration for argus as a system
      daemon.  A sample is provided in ./support/Config/argus.conf.

         # cp ./support/Config/argus.conf /etc/argus.conf
         # chmod 600 /etc/argus.conf
     
      After this you will need to modify the sample configuration in
      order to activate the collection of audit records.  You should
      uncomment the entry #ARGUS_OUTPUT_FILE="/usr/argus/data/argus.out".
      And, of course, if you prefer, definately modify the value for
      the destination filname for your installation.


      This should handle the basic installation.
      

Configuring Argus

9.1  How do I configure Argus?
      For most uses, Argus requires only a few simple configuration
      variables to do its work.   For the custom minded, Argus
      supports a large number of options.
      
      Argus accepts configuration options on the command line, but
      Argus is generally configured using the argus.conf file that
      is normally found in either /etc or $ARGUSHOME.  The variables
      that are set by this file can be overriden by the use of command
      line switches.  And on the command line you can specify an
      alternative configuration file that is specified using the
      "-F configfile" option.  

      You can also eliminate any configuration directives in the
      /etc/argus.conf file by using the -X option on the commandline, so
      you have a lot of flexibility.

      To setup a /etc/argus.conf file, copy the example configuration
      to /etc and modify its values accordingly.

9.2  Are there sample configurations?

      Yes, ./support/Config/argus.conf is the best sample configuration
      file, and it provides extensive descriptions of the options and
      their default settings.  This sample file sets most of the
      common options needed to run Argus as a system daemon.  Look at
      the values and set them according to your specific needs.
      Guidelines are provided in the text of the sample file.

9.3  What do I need to configure?

      Minimally, the only thing you need to configure is
      is "where do you want Argus to send its output?"  For most
      sites the default values for all options will be fine.

      Argus can either write its output to a file, or to offer
      remote access via a socket, or both.  Most sites will want to
      write Argus output to a file, some will want to offer access
      to Argus data via the network.  Security issues abound here,
      so turn on remote access with some caution.

9.3  Can I configure argus to write output to more than one file?
 
      Yes, Argus supports writing to up to 5 outputs, mixed between
      output files and remote sockets.  And each file can have its own
      independant filter.  If you want all TCP transaction audits to
      go into a TCP output file, and all other records to go to another
      file, no problem.
 
         argus -w tcp.file "tcp" -w nottcp.file "not tcp"

      In the argus.conf file, you can have upto 5 ARGUS_OUTPUT_FILE
      entries.



Running Argus

10.1  How do I run Argus?

      Argus is run either as a persistant daemon, reading live
      packets from a network interface, or as a user program,
      reading packets from a packet capture file.  The default,
      i.e. when it is run without any configuration, is to run
      as a daemon.

      If everything is installed properly, and the /etc/argus.conf
      file is configured correctly, all you need to run argus is:

         # argus

      This will cause Argus to look for a configuration file in
      /etc/argus.conf or in the $ARGUSPATH, or $ARGUSHOME directory,
      parse it and then open the network interface to begin reading
      packets.  Argus will write its output to whatever outputfile is
      specified in the /etc/argus.conf file.

      If you intend to remotely attach to this Argus, you'll need to
      tell Argus what port to put a listen down on.  The default
      port for clients is port 561.  We recommend using this port
      number.

         # argus -P 561 -w outputfile


      In order to configure Argus to read packets from a packet 
      capture file, use the "-r" option.

         % argus -r ./packetfile

      Argus has a large number of options, which can be set
      through an .Argusrc file, the use of command line options,
      or through a separate configuration file that is specifed
      at run time.  These options are designed to specify things
      like, what type of information Argus should capture, how
      often it should generate output records, whether it should
      put the network interface in promiscuous mode when run,
      should it create a pid file, etc...  The complete list is
      described int the Argus.8 man page.


10.2  Do I need to be root to run Argus?
 
      When run as a user program, if you intend to read packets
      from a live interface, you will need to have root privleges
      to either open the device, or to put the interface in
      promiscuous mode.

      To have Argus read packet capture files and generate flow
      transaction report records, no you do not need to be root.
 

10.3  Can I have Argus start at boot time?

      Most installations will want to start Argus as a daemon at
      boot time, and the ./support/Startup/argus file is designed
      to help support this.  This needs to be configured by a Unix
      system administrator, using tools such as chkconfig.

      See the README file in ./support/Startup for instructions for
      doing this.


10.4  What are some simple examples to show me how to run Argus?

      To read packets from a file and to pipe the binary
      output to standard out.

         % argus -r filename -w -

      To capture 64 bytes of User data for each transaction.

         % argus -U 64

      To specify a particular interface (eth1) for packet capture.

         # argus -i eth1

      To tell Argus to include the MAC addresses in each
      network flow transaction report.

         % argus -m

      To assign an IP address as the probes ID.

         % argus -e 128.64.1.2

      To cause Argus to generate response time data network
      flows.  This will generate more audit records per flow
      for flows like ICMP echo request/response flows.

         % argus -R

      To have Argus generate status records for active network
      flows every 0.10 seconds, which may be useful for some
      flow analysis techniques.

         % argus -S 0.10


10.5  How do you run Argus on your systems?

      argus -e `hostname` -P 561 -U128 -mRS 30



Security Considerations

11.1  Is there any type of access control for a remote Argus?

      Argus can use two types of access control.  The first is provided
      by tcp_wrappers() and the other is provided by SASL.

      tcp_wrappers() provides a mechanism where you can specify what
      hosts can access the Argus.  This is an excellent utility, and
      should be a part of any system.   ./configure will find a
      tcp_wrappers directory if one is available in the configure
      path, so inclusion of tcp_wrappers access control in automatic.

      SASL provides strong authentication and authorization when accessing
      argi.  This is very important stuff when accessing remote real-time
      Argus data.

11.2. Where can I get tcp-wrappers()?

      ftp://ftp.porcupine.org/pub/security/tcp_wrappers_7.6.tar.gz

11.3. Is there any confidentiality protection for Argus data on the wire?

      When you access remote real-time Argus data, there may be a need
      to encrypt the data.  Argus data does provide a rich source of
      information for the network administrator, but it will also provide
      a good source of information for the would-be intruder.

      On the wire confidendiality is provided by the SASL package. 
      ./configure is designed to find SASL and enable it automatically.

11.4. Where can I get SASL?

      Google "SASL CMU".



Argus Client Programs

12.1  What is ra()?

      ra (read Argus), is the principal program for reading and
      printing Argus data.  All other ra* programs share the
      same options and run time behavior as ra().

12.2  What is racount()?

      racount will read Argus data and print out an accounting of
      the records and the data they contain.  This is a pretty
      minimal program, but it is very handy for checking that
      Argus and its client programs are accurate in the packet
      and byte counts that are reported.

12.3  What is rasort()?

      rasort() sorts Argus data records, based on a large number
      of sorting criteria.  The criteria are:
         startime, lasttime, duration, srcaddr, dstaddr,
         proto, sport, dport, stos, dtos, sttl, dttl,
         bytes, srcbytes, dstbytes, packets, srcpackets and dstpackets.

      rasort sorts based on the order of selection criteria
      on the command line, which defines the sorting precedence.

         rasort -s dstaddr -s dport -s packets -r Argus.file - tcp

      This will sort the tcp based transaction records that are
      in Argus.file based on destination address, and if
      the addresses are equal, it will sort based on the
      destination port number, and when both of these criteria
      are equal, it will futher sort based on the number of
      packets seen in the transaction.


12.4  Where is raxml()?

      Is obseleted, as all ra* programs can print out xml format using
      the new "-M xml" command line option. 

12.5  Where is ramon()?

      Ramon() has also been obeleted, as all ra* programs can do what
      ramon() did using the "-M rmon" command line option..

      This option is designed to support the two primary groups of an RMON2
      probe.  Thus the name rmon. These groups are the TopN and the
      Matrix group.  The RMON TopN provides a table of the the top
      "talking" IP addresses with packet and bytes counts, and the Matrix
      group provides a table fo the top "talking" pairs of IP addresses.

      See the documentation on how to do this.

12.6  What is rapath?

      Rapath() extracts path information from argus data files.  The idea
      is that if argus() sees a traceroute() volley, all the information 
      needed to generate the traceroute information is available in the
      argus data.

      See the manpage for rapath().

12.7  What is racluster?

      Racluster() replaces ragator() as the general argus aggregation tool.

      See the manpage for racluster().


12.10 What is ratemplate?

      Ratemplate.c is a prototype template for you to write your own argus
      client programs.


Problems

13.1 I don't think Argus is auditing all the traffic.  What could be wrong?

      Argus audits all the packets that it receives.  Usually when
      you suspect that there is traffic that Argus isn't reporting,
      it is generally one of two situation. 

         Argus is usually not seeing the packets.
         Argus is reporting the packets in an unexpected flow.

13.2 Ra doesn't seem to read Argus output properly.

      Three things to try. 

      First is make sure that the ra() that you are using 
      is from argus-clients-3.0.  ra 2.x cannot read Argus-3.0
      data.  To verify the ra() version,  run ra -h.

      Second is that Argus.log may need to removed so that Argus
      can write a clean output log.  There may be a situation where
      Argus is writing into a Argus-2.0 data file.  The two header
      formats are not compatible, so ra may have trouble with 
      that.  With still Argus running just: 
      
         mv Argus.log testfile 
      
      Argus will recreate Argus.log when new data is 
      ready to be written.  When the Argus.log reappears, 
      then try to read from it. 

      If the problem doesn't relate to upgrading from 2.0
      to 3.0, it may be that you need to turn off name lookups
      using the -n option.  What appears to be no output may
      be the delay in looking up a host name, and the DNS
      server is not responding.  Try:
      
         ra -nr Argus.log 

     If this doesn't clear up the problem, send mail to the mailing list.
      

   
Audit Management

14.1. Can I compress Argus log files?
      All ra* based clients can read compressed (.gz, .bz2 or .Z) Argus data files.
      This allows you to store your Argus data files using gzip(1), bzip2(1)
      or compress(1).

      This provides in general 3-4:1 compression.

      Also, all ra* based clients can read data from stdin, using the "-r -"
      option, so you can pipe the output of uncompress utilities directly
      into ra* programs.  This should allow for flexibility in the type
      of compression to use.
    
      
14.2. Can I process/archive the Argus output file while Argus is running?

      Argus allows for removing its output file, "on the fly".  Argus will
      recover by recreating its output file, accordingly.  This allows you
      to "pull" the data file away from an Argus daemon for processing,
      archiving, whatever.

      The Argus package includes a sample program for managing Argus logs that
      takes advantage of this behavior.  The very simple sh script is
      ./support/Archive/argusarchive.  This program will simply rename
      a well known Argus output file, sort and compress its output, and
      then move to into a calender structured filesystem.

      This is just a sample program, but it does do a pretty good job.

      The idea is to have cron(8) execute this type of program on a time basis.

      There is a sample crontab entry for this in the ./support/System
      directory, that calls argusarchive every hour.


14.3. Can you suggest a daily log reporting configuration?


14.4. What about storing Argus logs in a database?

