This is ../info/term.info, produced by makeinfo version 4.8 from
term.texi.

INFO-DIR-SECTION XEmacs Editor
START-INFO-DIR-ENTRY
* Term mode: (term).		XEmacs Terminal Emulator Mode.
END-INFO-DIR-ENTRY


File: term.info,  Node: Top,  Prev: (DIR)

Terminal emulator mode
**********************

   This is some notes about the term Emacs mode.

* Menu:

* term mode::


File: term.info,  Node: term mode,  Prev: Top,  Up: Top

1 XEmacs Terminal Emulator Mode
*******************************

* Menu:

* Overview::
* Connecting to remote computers::
* Paging::
* Terminal escapes::

   The `term' package includes the major modes `term', `shell', and
`gud' (for running gbd or another debugger).  It is a replacement for
the comint mode of Emacs 19, as well as shell, gdb, terminal, and
telnet modes.  The package works best with recent releases of Emacs 19,
but will also work reasonably well with Emacs 18 as well as Lucid Emacs
19.

   The file `nshell.el' is a wrapper to use unless term mode is built
into Emacs.  If works around some of the missing in older Emacs
versions.  To use it, edit the paths in `nshell.el', appropriately, and
then `M-x load-file nshell.el RET'.  This will also load in replacement
shell and gud modes.


File: term.info,  Node: Overview,  Next: Connecting to remote computers,  Up: term mode

1.1 Overview
============

The `term' mode is used to control a program (an "inferior process").
It sends most keyboard input characters to the program, and displays
output from the program in the buffer.  This is similar to the
traditional comint mode, and modes derived from it (such as shell and
gdb modes).  You can do with the new term-based shell the same sort of
things you could do with the old shell mode, using more or less the
same interface.  However, the new mode is more flexible, and works
somewhat differently.

* Menu:

* Output from the inferior::
* subbuffer:: The sub-buffer
* altsubbuffer:: The alternate sub-buffer
* Input to the inferior::


File: term.info,  Node: Output from the inferior,  Next: subbuffer,  Up: Overview

1.1.1 Output from the inferior
------------------------------

In typical usage, output from the inferior is added to the end of the
buffer.  If needed, the window will be scrolled, just like a regular
terminal.  (Only one line at a time will be scrolled, just like regular
terminals, and in contrast to the old shell mode.)  Thus the buffer
becomes a log of your interaction with the inferior, just like the old
shell mode.

   Like a real terminal, term maintains a "cursor position."  This is
the `process-mark' of the inferior process.  If the process-mark is not
at the end of the buffer, output from the inferior will overwrite
existing text in the buffer.  This is like a real terminal, but unlike
the old shell mode (which inserts the output, instead of overwriting).

   Some programs (such as Emacs itself) need to control the appearance
on the screen in detail.  They do this by sending special control
codes.  The exact control codes needed from terminal to terminal, but
nowadays most terminals and terminal emulators (including xterm)
understand the so-called "ANSI escape sequences" (first popularized by
the Digital's VT100 family of terminal).  The term mode also
understands these escape sequences, and for each control code does the
appropriate thing to change the buffer so that the appearance of the
window will match what it would be on a real terminal.  (In contrast,
the old shell mode doesn't handle terminal control codes at all.)

   See <...> for the specific control codes.


File: term.info,  Node: subbuffer,  Next: altsubbuffer,  Prev: Output from the inferior,  Up: Overview

1.1.2 The sub-buffer
--------------------

A program that talks to terminal expects the terminal to have a fixed
size.  If the program is talking a terminal emulator program such as
`xterm', that size can be changed (if the xterm window is re-sized),
but programs still assume a logical terminal that has a fixed size
independent of the amount of output transmitted by the programs.

   To programs that use it, the Emacs terminal emulator acts as if it
too has a fixed size.  The "sub-buffer" is the part of a `term'-mode
buffer that corresponds to a "normal" terminal.  Most of the time
(unless you explicitly scroll the window displaying the buffer), the
sub-buffer is the part of the buffer that is displayed in a window.

   The sub-buffer is defined in terms of three buffer-local-variable:

 -- Variable: term-height
     The height of the sub-buffer, in screen lines.

 -- Variable: term-width
     The width of the sub-buffer, in screen columns.

 -- Variable: term-home-marker
     The "home" position, that is the top left corner of the sub-buffer.

   The sub-buffer is assumed to be the end part of the buffer; the
`term-home-marker' should never be more than `term-height' screen lines
from the end of the buffer.


File: term.info,  Node: altsubbuffer,  Next: Input to the inferior,  Prev: subbuffer,  Up: Overview

1.1.3 The alternate sub-buffer
------------------------------

When a "graphical" program finishes, it is nice to restore the screen
state to what it was before the program started.  Many people are used
to this behavior from `xterm', and its also offered by the `term'
emulator.

 -- Function: term-switch-to-alternate-sub-buffer set
     If SET is true, and we're not already using the alternate
     sub-buffer, switch to it.  What this means is that the
     `term-home-marker' is saved (in the variable
     `term-saved-home-marker'), and the `term-home-marker' is set to
     the end of the buffer.

     If SET is false and we're using the alternate sub-buffer, switch
     back to the saved sub-buffer.  What this means is that the
     (current, alternate) sub-buffer is deleted (using `(delete-region
     term-home-marker (point-max))'), and then the `term-home-marker'
     is restored (from `term-saved-home-marker').


File: term.info,  Node: Input to the inferior,  Prev: altsubbuffer,  Up: Overview

1.1.4 Input to the inferior
---------------------------

Characters typed by the user are sent to the inferior.  How this is
done depends on whether the `term' buffer is in "character" mode or
"line" mode.  (A `term' buffer can also be in "pager" mode.  This is
discussed <later>.)  Which of these is currently active is specified in
the mode line.  The difference between them is the key-bindings
available.

   In character mode, one character (by default <C-c>) is special, and
is a prefix for various commands.  All other characters are sent
directly to the inferior process, with no interpretation by Emacs.
Character mode looks and feels like a real terminal, or a conventional
terminal emulator such as xterm.

   In line mode, key commands mostly have standard Emacs actions.
Regulars characters insert themselves into the buffer.  When return is
typed, the entire current line of the buffer (except possibly the
prompt) is sent to the inferior process.  Line mode is basically the
original shell mode from earlier Emacs versions.

   To switch from line mode to character mode type `C-c C-k'.  To
switch from character mode to line mode type `C-c C-j'.

   In either mode, "echoing" of user input is handled by the inferior.
Therefor, in line mode after an input line at the end of the buffer is
sent to the inferior, it is deleted from the buffer.  This is so that
the inferior can echo the input, if it wishes (which it normally does).


File: term.info,  Node: Connecting to remote computers,  Next: Paging,  Prev: Overview,  Up: term mode

1.2 Connecting to remote computers
==================================

If you want to login to a remove computer, you can do that just as you
would expect, using whatever commands you would normally use.

   (This is worth emphasizing, because earlier versions of `shell' mode
would not work properly if you tried to log in to some other computer,
because of the way echoing was handled.  That is why there was a
separate `telnet' mode to partially compensate for these problems.  The
`telnet' mode is no longer needed, and is basically obsolete.)

   A program that asks you for a password will normally suppress
echoing of the password, so the password will not show up in the buffer.
This will happen just as if you were using a real terminal, if the
buffer is in char mode.  If it is in line mode, the password will be
temporarily visible, but will be erased when you hit return.  (This
happens automatically; there is no special password processing.)

   When you log in to a different machine, you need to specify the type
of terminal your using.   If you are talking to a Bourne-compatible
shell, and your system understands the `TERMCAP' variable, you can use
the command `M-x shell-send-termcap', which sends a string specifying
the terminal type and size.  (This command is also useful after the
window has changed size.)

   If you need to specify the terminal type manually, you can try the
terminal types "ansi" or "vt100".

   You can of course run gdb on that remote computer.  One useful
trick:  If you invoke gdb with the `--fullname' option, it will send
special commands to Emacs that will cause Emacs to pop up the source
files you're debugging.  This will work whether or not gdb is running
on a different computer than Emacs, assuming can access the source
files specified by gdb.


File: term.info,  Node: Paging,  Next: Terminal escapes,  Prev: Connecting to remote computers,  Up: term mode

1.3 Paging
==========

When the pager is enabled, Emacs will "pause" after each screenful of
output (since the last input sent to the inferior).  It will enter
"pager" mode, which feels a lot like the "more" program:  Typing a
space requests another screenful of output.  Other commands request
more or less output, or scroll backwards in the `term' buffer.  In
pager mode, type `h' or `?' to display a help message listing all the
available pager mode commands.

   In either character or line mode, type `C-c p' to enable paging, and
`C-c D' to disable it.


File: term.info,  Node: Terminal escapes,  Prev: Paging,  Up: term mode

1.4 Terminal Escape sequences
=============================

A program that does "graphics" on a terminal controls the terminal by
sending strings called "terminal escape sequences" that the terminal
(or terminal emulator) interprets as special commands.  The `term' mode
includes a terminal emulator that understands standard ANSI escape
sequences, originally popularized by VT100 terminals, and now used by
the `xterm' program and most modern terminal emulator software.

* Menu:

* Cursor motion:: Escape sequences to move the cursor
* Erasing:: Escape commands for erasing text
* Inserting and deleting:: Escape sequences to insert and delete text
* Scrolling:: Escape sequences to scroll part of the visible window
* Command hook::
* Miscellaneous escapes::

   printing chars

   tab

   LF


File: term.info,  Node: Cursor motion,  Next: Erasing,  Up: Terminal escapes

1.4.1 Escape sequences to move the cursor
-----------------------------------------

`RETURN'
     Moves to the beginning of the current screen line.

`C-b'
     Moves backwards one column.  (Tabs are broken up if needed.)

`Esc [ R ; C H'
     Move to screen row R, screen column C, where (R=1) is the top row,
     and (C=1) is the leftmost column.  Defaults are R=1 and C=1.

`Esc [ N A'
     Move N (default 1) screen lines up.

`Esc [ N B'
     Move N (default 1) screen lines down.

`Esc [ N C'
     Move N (default 1) columns right.

`Esc [ N D'
     Move N (default 1) columns left.


File: term.info,  Node: Erasing,  Next: Inserting and deleting,  Prev: Cursor motion,  Up: Terminal escapes

1.4.2 Escape commands for erasing text
--------------------------------------

These commands "erase" part of the sub-buffer.  Erasing means replacing
by white space; it is not the same as deleting.  The relative screen
positions of things that are not erased remain unchanged with each
other, as does the relative cursor position.

`E [ J'
     Erase from cursor to end of screen.

`E [ 0 J'
     Same as E [ J.

`E [ 1 J'
     Erase from home position to point.

`E [ 2 J'
     Erase whole sub-buffer.

`E [ K'
     Erase from point to end of screen line.

`E [ 0 K'
     Same as E [ K.

`E [ 1 K'
     Erase from beginning of screen line to point.

`E [ 2 K'
     Erase whole screen line.


File: term.info,  Node: Inserting and deleting,  Next: Scrolling,  Prev: Erasing,  Up: Terminal escapes

1.4.3 Escape sequences to insert and delete text
------------------------------------------------

`Esc [ N L'
     Insert N (default 1) blank lines.

`Esc [ N M'
     Delete N (default 1) lines.

`Esc [ N P'
     Delete N (default 1) characters.

`Esc [ N @'
     Insert N (default 1) spaces.


File: term.info,  Node: Scrolling,  Next: Command hook,  Prev: Inserting and deleting,  Up: Terminal escapes

1.4.4 Escape sequences to scroll part of the visible window
-----------------------------------------------------------

`Esc D'
     Scroll forward one screen line.

`Esc M'
     Scroll backwards one screen line.

`Esc [ T ; B r'
     Set the scrolling region to be from lines T down to line B
     inclusive, where line 1 is the topmost line.


File: term.info,  Node: Command hook,  Next: Miscellaneous escapes,  Prev: Scrolling,  Up: Terminal escapes

1.4.5 Command hook
------------------

If `C-z' is seen, any text up to a following <LF> is scanned.  The text
in between (not counting the initial C-z or the final LF) is passed to
the function that is the value of `term-command-hook'.

   The default value of the `term-command-hook' variable is the
function `term-command-hook', which handles the following:

`C-z C-z FILENAME:LINENUMBER:IGNORED LF'
     Set term-pending-frame to `(cons "FILENAME" LINENUMBER)'.  When
     the buffer is displayed in the current window, show the FILENAME
     in the other window, and show an arrow at LINENUMBER.  Gdb emits
     these strings when invoked with the flag -fullname.  This is used
     by gdb mode; you can also invoke gdb with this flag from shell
     mode.

`C-z / DIRNAME LF'
     Set the directory of the term buffer to DIRNAME

`C-z ! LEXPR LF'
     Read and evaluate LEXPR as a Lisp expression.  The result is
     ignored.


File: term.info,  Node: Miscellaneous escapes,  Prev: Command hook,  Up: Terminal escapes

1.4.6 Miscellaneous escapes
---------------------------

`C-g (Bell)'
     Calls `(beep t)'.

`Esc 7'
     Save cursor.

`Esc 8'
     Restore cursor.

`Esc [ 47 h'
     Switch to the alternate sub-buffer,

`Esc [ 47 l'
     Switch back to the regular sub-buffer,



Tag Table:
Node: Top202
Node: term mode368
Node: Overview1235
Node: Output from the inferior1990
Node: subbuffer3579
Node: altsubbuffer4914
Node: Input to the inferior5949
Node: Connecting to remote computers7482
Node: Paging9392
Node: Terminal escapes10066
Node: Cursor motion10939
Node: Erasing11611
Node: Inserting and deleting12415
Node: Scrolling12817
Node: Command hook13275
Node: Miscellaneous escapes14320

End Tag Table
