FreeBSD Developers' Handbook
Prev | Chapter 11 x86 Assembly Language Programming | Next

# 11.10 UNIX® Environment

An important UNIX® concept is the environment, which is defined by environment variables. Some are set by the system, others by you, yet others by the shell, or any program that loads another program.

## 11.10.1 How to Find Environment Variables

I said earlier that when a program starts executing, the stack contains `argc` followed by the NULL-terminated `argv` array, followed by something else. The "something else" is the environment, or, to be more precise, a NULL-terminated array of pointers to environment variables. This is often referred to as `env`.

The structure of `env` is the same as that of `argv`, a list of memory addresses followed by a NULL (`0`). In this case, there is no `"envc"`¡X¡Xwe figure out where the array ends by searching for the final NULL.

The variables usually come in the `name=value` format, but sometimes the `=value` part may be missing. We need to account for that possibility.

## 11.10.2 webvars

I could just show you some code that prints the environment the same way the UNIX env command does. But I thought it would be more interesting to write a simple assembly language CGI utility.

### 11.10.2.1 CGI: A Quick Overview

I have a detailed CGI tutorial on my web site, but here is a very quick overview of CGI:

- The web server communicates with the CGI program by setting environment variables.

- The CGI program sends its output to `stdout`. The web server reads it from there.

- It must start with an HTTP header followed by two blank lines.

- It then prints the HTML code, or whatever other type of data it is producing.

> Note: While certain environment variables use standard names, others vary, depending on the web server. That makes webvars quite a useful diagnostic tool.

### 11.10.2.2 The Code

Our webvars program, then, must send out the HTTP header followed by some HTML mark-up. It then must read the environment variables one by one and send them out as part of the HTML page.

The code follows. I placed comments and explanations right inside the code:

    ;;;;;;; webvars.asm ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    ;
    ; Copyright (c) 2000 G. Adam Stanislav
    ; All rights reserved.
    ;
    ; Redistribution and use in source and binary forms, with or without
    ; modification, are permitted provided that the following conditions
    ; are met:
    ; 1. Redistributions of source code must retain the above copyright
    ;    notice, this list of conditions and the following disclaimer.
    ; 2. Redistributions in binary form must reproduce the above copyright
    ;    notice, this list of conditions and the following disclaimer in the
    ;    documentation and/or other materials provided with the distribution.
    ;
    ; THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
    ; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
    ; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
    ; ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
    ; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    ; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
    ; OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
    ; HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
    ; LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
    ; OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
    ; SUCH DAMAGE.
    ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    ;
    ; Version 1.0
    ;
    ; Started:	 8-Dec-2000
    ; Updated:	 8-Dec-2000
    ;
    ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    %include	'system.inc'

    section	.data
    http	db	'Content-type: text/html', 0Ah, 0Ah
    	db	'<?xml version="1.0" encoding="UTF-8"?>', 0Ah
    	db	'<!DOCTYPE html PUBLIC "-//W3C/DTD XHTML Strict//EN" '
    	db	'"DTD/xhtml1-strict.dtd">', 0Ah
    	db	'<html xmlns="http://www.w3.org/1999/xhtml" '
    	db	'xml.lang="en" lang="en">', 0Ah
    	db	'<head>', 0Ah
    	db	'<title>Web Environment</title>', 0Ah
    	db	'<meta name="author" content="G. Adam Stanislav" />', 0Ah
    	db	'</head>', 0Ah, 0Ah
    	db	'<body bgcolor="#ffffff" text="#000000" link="#0000ff" '
    	db	'vlink="#840084" alink="#0000ff">', 0Ah
    	db	'<div class="webvars">', 0Ah
    	db	'<h1>Web Environment</h1>', 0Ah
    	db	'<p>The following <b>environment variables</b> are defined '
    	db	'on this web server:</p>', 0Ah, 0Ah
    	db	'<table align="center" width="80" border="0" cellpadding="10" '
    	db	'cellspacing="0" class="webvars">', 0Ah
    httplen	equ	$-http
    left	db	'<tr>', 0Ah
    	db	'<td class="name"><tt>'
    leftlen	equ	$-left
    middle	db	'</tt></td>', 0Ah
    	db	'<td class="value"><tt><b>'
    midlen	equ	$-middle
    undef	db	'<i>(undefined)</i>'
    undeflen	equ	$-undef
    right	db	'</b></tt></td>', 0Ah
    	db	'</tr>', 0Ah
    rightlen	equ	$-right
    wrap	db	'</table>', 0Ah
    	db	'</div>', 0Ah
    	db	'</body>', 0Ah
    	db	'</html>', 0Ah, 0Ah
    wraplen	equ	$-wrap

    section	.text
    global	_start
    _start:
    	; First, send out all the http and xhtml stuff that is
    	; needed before we start showing the environment
    	push	dword httplen
    	push	dword http
    	push	dword stdout
    	sys.write

    	; Now find how far on the stack the environment pointers
    	; are. We have 12 bytes we have pushed before "argc"
    	mov	eax, [esp+12]

    	; We need to remove the following from the stack:
    	;
    	;	The 12 bytes we pushed for sys.write
    	;	The  4 bytes of argc
    	;	The EAX*4 bytes of argv
    	;	The  4 bytes of the NULL after argv
    	;
    	; Total:
    	;	20 + eax * 4
    	;
    	; Because stack grows down, we need to ADD that many bytes
    	; to ESP.
    	lea	esp, [esp+20+eax*4]
    	cld		; This should already be the case, but let's be sure.

    	; Loop through the environment, printing it out
    .loop:
    	pop	edi
    	or	edi, edi	; Done yet?
    	je	near .wrap

    	; Print the left part of HTML
    	push	dword leftlen
    	push	dword left
    	push	dword stdout
    	sys.write

    	; It may be tempting to search for the '=' in the env string next.
    	; But it is possible there is no '=', so we search for the
    	; terminating NUL first.
    	mov	esi, edi	; Save start of string
    	sub	ecx, ecx
    	not	ecx		; ECX = FFFFFFFF
    	sub	eax, eax
    repne	scasb
    	not	ecx		; ECX = string length + 1
    	mov	ebx, ecx	; Save it in EBX

    	; Now is the time to find '='
    	mov	edi, esi	; Start of string
    	mov	al, '='
    repne	scasb
    	not	ecx
    	add	ecx, ebx	; Length of name

    	push	ecx
    	push	esi
    	push	dword stdout
    	sys.write

    	; Print the middle part of HTML table code
    	push	dword midlen
    	push	dword middle
    	push	dword stdout
    	sys.write

    	; Find the length of the value
    	not	ecx
    	lea	ebx, [ebx+ecx-1]

    	; Print "undefined" if 0
    	or	ebx, ebx
    	jne	.value

    	mov	ebx, undeflen
    	mov	edi, undef

    .value:
    	push	ebx
    	push	edi
    	push	dword stdout
    	sys.write

    	; Print the right part of the table row
    	push	dword rightlen
    	push	dword right
    	push	dword stdout
    	sys.write

    	; Get rid of the 60 bytes we have pushed
    	add	esp, byte 60

    	; Get the next variable
    	jmp	.loop

    .wrap:
    	; Print the rest of HTML
    	push	dword wraplen
    	push	dword wrap
    	push	dword stdout
    	sys.write

    	; Return success
    	push	dword 0
    	sys.exit

This code produces a 1,396-byte executable. Most of it is data, i.e., the HTML mark-up we need to send out.

Assemble and link it as usual:

    % nasm -f elf webvars.asm
    % ld -s -o webvars webvars.o

To use it, you need to upload `webvars` to your web server. Depending on how your web server is set up, you may have to store it in a special `cgi-bin` directory, or perhaps rename it with a `.cgi` extension.

Then you need to use your browser to view its output. To see its output on my web server, please go to `http://www.int80h.org/webvars/`. If curious about the additional environment variables present in a password protected web directory, go to `http://www.int80h.org/private/`, using the name `asm` and password `programmer`.

Prev | Home | Next
Command Line Arguments | Up | Working with Files

¥»¤å¤Î¨ä¥L¤å¥ó¡A¥i¥Ñ¦¹¤U¸ü¡Gftp://ftp.FreeBSD.org/pub/FreeBSD/doc/¡C

Y¦³ FreeBSD ¤è±ºÃ°Ý¡A½Ð¥ý¾\Åª FreeBSD ¬ÛÃö¤å¥ó¡A¦p¤£¯à¸Ñ¨Mªº¸Ü¡A¦A¬¢¸ß <questions@FreeBSD.org>¡C
Ãö©ó¥»¤å¥óªº°ÝÃD¡A½Ð¬¢¸ß <doc@FreeBSD.org>¡C