TED(1)

NAME
Ted - an easy rich text processor (RTF file editor)

SYNOPSIS

  Interactive calls as a GUI text processor
Ted [ settings ] [ filename-1 ] [ filename-2 ..... ]

  Special command-line calls
Ted [ settings ] --command [ arg-1 ..... ] [ arg-2 ..... ]

DESCRIPTION
Ted is an easy rich text processor (RTF file editor) with a graphic user interface. For more information, see the users' manual (details below). Besides that, Ted is a utility to convert RTF files to various formats. One of its goals is to make it possible to produce decent looking documents avoiding the pain of antiquated packages like nroff that I had to use to type this man page.

  Ted can read the following file formats
Documents can be read from files or from standard input. Ted only reads from standard input in calls that consume one single input document. (a file, a pipe, or what you type as a proficient RTF guru)

rtf Rich Text Files with extension *.rtf or -rtf- for standard input.

txt Plain Text Files with extension *.txt or -txt- for standard input. The encoding of the text file is assumed to be UTF-8. To open files with a different encoding, use the iconv command.

  Ted can write the following file formats
Documents can be written to files or to standard output.

rtf Rich Text Files with extension *.rtf or -rtf- for standard output.

txt Plain Text files with extension *.txt or -txt- for standard output. The encoding of the text file is UTF-8. To save files with a different encoding, use the iconv command. If Ted saves a document to plain text, it discards all formatting and all illustrations.

html
    Hypertext Markup Language files with extension *.html or -html- for standard output. If Ted saves HTML to standard output, it discards all images and all embedded objects.

eml HTML Mail message format (rfc 2557) files with extension *.eml or -eml- for standard output. The output can be piped into ssmtp or mailx as a HTML formatted mail message.

epub
    EPUB e-book files with extension *.epub or -epub- for standard output. The document is saved in the EPUB electronic book format that is supported by most e-readers and tablets.

ps  PostScript files with extension *.ps or -ps- for standard output. The output can be printed or converted to PDF.

svg Scalable Vector Graphics files with extension *.svg or -svg- for standard output. The output can be used as an illustration.

pdf Portable Document Format files with extension *.pdf or -pdf- for standard output. The output can be viewed with the Adobe Acrobat reader or compatible programs. Ted uses GhostScript (ps2pdf and gs) to convert PostScript to pdf.

COMMAND LINE CALLS

  Ted
Show initial window with menu options to open files and to exit Ted.

  Ted doc1.rtf doc2.txt ..
Open the documents on the command line.

  Ted --Find pattern f1.rtf f2.txt
Open the files on the command line and search for pattern.

  Ted --RegFind pattern f1.rtf f2.txt
Open the documents on the command line and search for pattern. Pattern is a regular expression. Ted uses the pcre regular expression matching library by Philip Hazel. For documentation see http://www.pcre.org. (Please realize that the casual user does not need to use or understand regular expressions.)

  Ted --TtfToAfm x.ttf y.afm
Make an afm file that describes a true type font. This can be practical when you manually configure fonts for Ted.

  Ted --RtfToPs < x.rtf > y.ps
Obsolete invocation: Use --printToFile. -rtf- -ps-

  Ted --RtfToPsPaper A4 < x.rtf > y.ps
Obsolete invocation: Use --printToFilePaper. -rtf- -ps- A4

  Ted --version
Show the version of Ted.

  Ted --platform
Show the platform for which Ted was built.

  Ted --build
Show the host and the date where Ted was built.

  Ted --fullVersion
Show version, platform and build.

  Ted --saveTo f1.rtf f2.txt
Read a file and save it. (in a different supported format) Supported formats are *.txt *.rtf and *.html. As Ted writes relatively readable rtf, this can be used as a kind of rtf pretty-printer.

  Ted --printToFile x.rtf y.ps
Convert a document to PostScript. Format for the default paper format. Use -rtf- for the document name to read the document from standard input. Use -ps- as output name to emit PostScript to standard output. This call is used by the rtf2pdf.sh script. If you use the script from an internet scripting tool like PHP, make sure that both Ted and gs are in the PATH. Note that this produces ps files with Teds default paper size.

  Ted --printToFilePaper x.rtf y.ps A4
Convert a document to PostScript. Format for the paper size given. Refer to --printToFile for IO redirections. Note that this produces ps files with the given paper size.

  Ted --print x.rtf
Print the document on the default printer. Format for the default paper size.

  Ted --printPaper x.rtf a4
Print the document on the default printer. Format for the paper size given.

  Ted --printToPrinter x.rtf lp1
Print the document on the printer given. Format for the default paper size.

  Ted --printToPrinterPaper x.rtf lp1 letter
Print the document on the printer given. Format for the paper size given.

  Ted --setProperty property value ....
See below

  Ted --FontsDocuments /tmp/fontsdocs
Create a directory and for every font that Ted knows about, store a document with all the symbols in the font. This is excellent testing material. It can also be used to view the fonts. The checkfontsdocs.sh job can be used to check whether the documents are correctly handled.

  Ted --GSFontmapForFiles `pwd`/*.ttf

  Ted --GSFontmapForFiles `pwd`/*.pfb
Emit a fragment for a GhostScript Fontmap file. The second and subsequent arguments are *.ttf, *.pfa or *.pfb file names. It always always makes sense to use absolute font file names: GhostScript needs to know where to look for the fonts.

  Ted --AfmForFontFiles `pwd`/*.ttf
Create an afm file for all *.pfa, *.pfb, *.ttf files on the command line. Note that to run the command, you need to have writing permission to the Ted afm directory, or at least in the localfonts subdirectory. Also note that you need to run the command with a umask that gives the generated afm files the correct permissions (022). The ++AfmForFontFiles variant tries to leave information in the AFM files on how to match X11 fonts to the fonts. With recent versions of Ted that use fontconfig, that is not really relevant.

OPTIONS
Ted supports the following configuration options. Default values are compiled into the Ted executable program. Ted searches for values in the following locations: (1) The command line, (2) ${HOME}/Ted.properties (3) @DATADIR@/Ted/Ted-${LOCALE}.properties, (4) @DATADIR@/Ted/Ted.properties. Unknown (or misspelled) properties are silently ignored. Use the --property=value or the --setProperty property value syntax on the command line.

magnification
    Magnification for drawing documents on the screen. The default value is 100%. The alternative format 1.0 for 100% is also supported. It has the disadvantage that it depends on the decimal sign of the current locale. (E.G: 1,2 for 120% in Western Europe.) Very small and very big values are ignored. 100% magnification translates to 96 DPI on screen.

unit
    The unit that is used by default. This property influences the appearance of the ruler and the interpretation of numbers entered in the format tool. Possible values are: inch, ", cm, mm, points, pt, picas, pi. The default is inch.

paper
    The format of the paper in the printer. The paper format is also used as the default page size for new documents. If a smaller page size is used for a document, Ted uses the Ted.paper property to print in the upper left corner of the paper. Possible values are: a4,a5,letter,legal,executive and strings in the form <Width> x <Height> or <Width> x <Height> <Unit> where <Width> and <Height> are numbers. Values for units are given above. If <Unit> is omitted, the value of the 'unit' property is assumed. Plain text files do not store a paper size for the file inside the file. The Ted.paper property is used for the page layout of every plain text file that Ted opens. Note that Ted uses the file /etc/papersize to find a default paper format. The default format can be overridden with any of the configuration mechanisms.

leftMargin, topMargin, rightMargin, bottomMargin:
    The default width of the page margins. The format is <Width> or <Width> <Unit>. Width is a number. Unit is one of the units mentioned above. The default unit is the value of unit above.

defaultPrinter
    If you want to use a different printer than the system default printer as the default printer from Ted, you can set this property to select that printer the first time you use the Print Dialog. The value is the name of a printer. Use the same names that you use in the lp -d somePrinter, or the lpr -P somePrinter commands.

afmDirectory
    The directory where Ted looks for font metric files. Ted only uses font metric files if fontconfig is disabled. Without fontcongig, only fonts that have a metric file in this directory can be used by Ted. In a default installation, metric files are expected in @DATADIR@/Ted/afm. This property is particularly useful when you cannot install Ted as root, and hence you have to store the metric files in some private directory. You can also make the afmDirectory point to the GhostScript fonts directory. E.G. to /usr/share/ghostscript/fonts. Refer to the section on adding fonts for more details. Use the gs -h command to find the exact location of the GhostScript afm files.

spellToolSystemDicts
    The directory where Ted looks for spelling dictionaries. In a default installation, spelling dictionaries are expected in @DATADIR@/Ted/dfa. This property is particularly useful when you cannot install Ted as root, and hence you have to store the dictionaries in some private directory.

documentFileName
    The name of this online document file. In a default installation this is @DATADIR@/Ted/TedDocument-en_US.rtf.

customPrintCommand
    A command to print through a custom printer command. Refer to the paragraph on printing for details.

customPrinterName
    The name that is used to designate the custom printer command on the Print Dialog. Refer to the paragraph on printing for details.

customPrintCommand2, customPrinterName2:
    To configure a second custom printer.

printDialogShowPlacementDrawing:
    Some laptops have microscopic screens. Setting this property to 0 hides the diagram that shows the placement of the document pages on the sheets of paper. This is to make the dialog a lot lower and to fit on the screen of this kind of computer.

showTableGrid
    By default, Ted draws a grid to show the structure of tables without borders. If you set this property to 0 no grid will be drawn.

fontDirectory
    The directory where Ted looks for fonts to include (embed) in its printed documents. Refer to the section on adding fonts for more details. Use the gs -h command to find the exact value. This property is only used on traditional UNIX systems that do not use fontconfig. AFM files that have been generated by Ted have a Ted specific comment that gives the font file name. So this property is only relevant is neither fontconfig, nor Ted generated AFM files are used.

usePostScriptFilters
    PostScript levels 2 and 3 support the concept of filters. Filters make it possible to code the images in a PostScript file much more efficiently. You can deactivate this option when you have a printer that does not support level 2 filters and the /FlateDecode filter. Recent versions of GhostScript support both. If you cannot print all images deactivate this setting. To deactivate set the value to 0.

usePostScriptIndexedImages:
    PostScript level 2 has a variant of the image operator that makes it possible to include images with a color indirection via a palette in the PostScript file. As many if the images included in rtf documents are of this kind, setting this property can help you to reduce the volume of the PostScript that is sent to the printer. All level 2 implementations, including GhostScript support indexed images. If you cannot print all images deactivate this setting. To deactivate set the value to 0.

customPsSetupFilename:
    The name of a PostScript file that is used for special printer setup and configuration. The contents of the file are inserted as part of the Setup section of the PostScript output.

skipBlankPages
    If this parameter is set to 1, Ted skips blank pages while printing. Pages that are completely empty will not be printed. If the document has headers and footers, the relevant headers and footers will be printed on the page and the page will not be blank.

skipEmptyPages
    If this parameter is set to 1, Ted skips empty pages while printing. Pages that are completely empty will not be printed. A page is not considered to be empty if it actually is empty, but the document has headers and footers. Under many circumstances the page would contain a header and a footer and it will be printed.

omitHeadersOnEmptyPages:
    If this parameter is set to 1, Ted will not print the page headers and footers on pages that do not contain any text from the document body or from notes. By design, this property interacts with the skipEmptyPages and skipBlankPages in the following surprising way: If both omitHeadersOnEmptyPages and skipBlankPages are set, a page without any body content will not be printed at all. However, if both omitHeadersOnEmptyPages and skipEmptyPages are set, a page without any body content will be printed as an empty page.

findToolExplicitFocus
    Tell the find tool to get the keyboard focus when you activate it. Usually this is desirable behavior. However some window managers make Ted crash when it tried to manipulate the keyboard focus. For that reason you can set the findToolExplicitFocus to 0 to tell Ted not to move the keyboard focus to the find tool to avoid problems.

autoHyphenate
    If a word in a line of text is wider than the width allocated for the paragraph, Ted makes the word protrude beyond the right margin. If you set the autoHyphenate property to 1, Ted will automatically insert optional hyphens (-) to fold the word. In general this is undesirable behavior. Only set the property on the command line and only if you use Ted to format documents. If the autoHyphenate property is set while you edit documents, the optional hyphens will end up in completely arbitrary locations in the document.

avoidFontconfig
    If Ted has been compiled to use fontconfig and freetype, setting this option to 1 tells Ted not to use fontconfig or freetype. It will fall back to the afm files and plain X11 text rendering. Turning off fontconfig has the disadvantage that fewer fonts are available and that text looks far worse on screen. For rtf to PostScript/PDF conversion it has the advantage that Ted is less dependent on the environment and that documents, that use standard fonts, are formatted even more more similar to what MS-Word does.

preferBase35Fonts
    If Ted has been compiled to use fontconfig and freetype, setting this option to 1 tells Ted not to use fontconfig to obtain the list of fonts. It will use the Adobe collection of 35 core PostScript fonts. Turning off fontconfig had the disadvantage the fewer fonts are available. The advantage is that the documents that you make only use a set of widely supported standard fonts.

embedFonts
    If Ted knows the name and location of font files on the file system, it will embed the fonts in its print out. This has the advantage that the generated PostScript will print identically on all printers. The disadvantage is that the files are bigger and possibly print slower. If you set this property to 0, Ted will not embed any fonts in its printout.

useKerning
    If set to 0, Ted will ignore kerning information in the afm files. This will make Ted start a little faster. The name suggests that otherwise, Ted will use kerning. That is not the case. The current version of Ted will never produce kerned output. The pretentious name was chosen because it is simple an it can be used in the future for what it actually suggests.

shadingMeshTwips
    The rtf file format supports 12 patterns that can be used as a background in the document. A shading can be applied to table cells, paragraphs and even separate pieces of text. Though Ted does not support shading patterns in the user interface, it does so if you print a document, or if you convert existing documents with a shading to file to convert them to Acrobat PDF. For printing, fine patterns are preferable to coarse ones and for PDF files that you want to view on screen, coarse patterns are preferable. For that reason, the default value of 3 points for the grain of the pattern is often undesirable. With this parameter, you can set the distance between the lines that make up the shading. The value is the distance between the lines in twips. Sensible values are between 10 and 100 twips. (0.5 and 5 points)

lenientRtf
    In normal operation, Ted performs elementary checks on the validity of rtf files. E.G. It checks whether the braces in the rtf file match. If you set this property to 1, the checks are much more lenient and Ted will try to open files that are syntactically incorrect.

traceEdits
    In normal operation, Ted keeps a trace of your editing actions. Ted uses the trace file to remember the information that it needs to execute Undo en Repeat actions. The trace is also used to recover your work after a crash. If you set the traceEdits property to 0 (zero) Ted will not make a trace. This also deactivates the Undo, Repeat and Recover actions.

pdfOutline
    By default, Ted inserts pdfmarks in the PostScript that it issues to produce an outline when the PostScript is converted to Acrobat PDF. Set this value to 0 (zero) if you do not want an outline.

BUGS

It can take a minute to start - before the Ted window appears on the display - because Ted polls the system printers.

FILES

@DATADIR@/Ted
    The directory with architecture independent files for Ted

/usr/bin/Ted
    The Ted executable program

@DATADIR@/Ted/Ted.properties
    The system wide configuration file for Ted

@DATADIR@/Ted/TedDocument-en_US.rtf
    The Ted help document

@DATADIR@/Ted/dfa/*.dfa
    Spell check dictionaries

@DATADIR@/Ted/Ted-*.properties
    Localized texts for the user interface+ localized settings

@DATADIR@/Ted/TedDocument-*.rtf
    Localized Ted documents. They must be configured in the @DATADIR@/Ted/Ted-*.properties files.

${HOME}/.Ted.properties
    Private configuration for Ted.

SEE ALSO
"Ted, an easy rich text processor", Mark de Does, http://www.nllgg.nl/Ted/ 2003 .. 2012.

The Ted users' manual that is accessible through Teds Help menu.

rtf2pdf(1), rtf2ps(1)

AUTHOR
A draft manual page was started by John A. Murdie, Department of Computer Science, University of York.

This version is composed and maintained by Mark de Does.