# Configuration file format -- Attributes

ht://Dig Copyright © 1995-2004 The ht://Dig Group
Please see the file COPYING for license information.

## Alphabetical list of attributes

accents_db
  type:
    string
  used by:
    htfuzzy, htsearch
  default:
    ${database_base}.accents.db
  block:
    Global
  version:
    all
  description:
    The database file used for the fuzzy "accents" search algorithm. This database is created by htfuzzy and used by htsearch.
  example:

    accents_db: | ${database_base}.uml.db

accept_language
  type:
    string list
  used by:
    htdig
  default:
    No default
  block:
    Server
  version:
    3.2.0b4 or later
  description:
    This attribute allows you to restrict the set of natural languages that are preferred as a response to an HTTP request performed by the digger. This can be done by putting one or more language tags (as defined by RFC 1766) in the preferred order, separated by spaces. By doing this, when the server performs a content negotiation based on the 'accept-language' given by the HTTP user agent, a different content can be shown depending on the value of this attribute. If set to an empty list, no language will be sent and the server default will be returned.
  example:

    accept_language: | en-us en it

add_anchors_to_excerpt
  type:
    boolean
  used by:
    htsearch
  default:
    true
  block:
    Global
  version:
    3.1.0 or later
  description:
    If set to true, the first occurrence of each matched word in the excerpt will be linked to the closest anchor in the document. This only has effect if the EXCERPT variable is used in the output template and the excerpt is actually going to be displayed.
  example:

    add_anchors_to_excerpt: | no

allow_double_slash
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    3.2.0b4 or later
  description:
    If set to true, strings of multiple slashes ('/') in URL paths will be left intact, rather than being collapsed. This is necessary for some search engine URLs which use slashes to separate fields rather than to separate directory components. However, it can lead to multiple database entries refering to the same file, and it causes '/foo//../' to be equivalent to '/foo/', rather than to '/'.
  example:

    allow_double_slash: | true

allow_in_form
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.0 or later
  description:
    Allows the specified config file attributes to be specified in search forms as separate fields. This could be used to allow form writers to design their own headers and footers and specify them in the search form. Another example would be to offer a menu of search_algorithms in the form.

    `<SELECT NAME="search_algorithm"> <OPTION VALUE="exact:1 prefix:0.6 synonyms:0.5 endings:0.1" SELECTED>fuzzy <OPTION VALUE="exact:1">exact </SELECT>`

    The general idea behind this is to make an input parameter out of any configuration attribute that's not already automatically handled by an input parameter. You can even make up your own configuration attribute names, for purposes of passing data from the search form to the results output. You're not restricted to the existing attribute names. The attributes listed in the allow_in_form list will be settable in the search form using input parameters of the same name, and will be propagated to the follow-up search form in the results template using template variables of the same name in upper-case. You can also make select lists out of any of these input parameters, in the follow-up search form, using the build_select_lists configuration attribute.
    WARNING: Extreme care are should be taken with this option, as allowing CGI scripts to set file names can open security holes.
  example:

    allow_in_form: | search_algorithm search_results_header

allow_numbers
  type:
    boolean
  used by:
    htdig, htsearch
  default:
    false
  block:
    Global
  version:
    all
  description:
    If set to true, numbers are considered words. This means that searches can be done on strings of digits as well as regular words. All the same rules apply to numbers as to words. This does not cause numbers containing a decimal point or commas to be treated as a single entity. When allow_numbers is false, words are stil allowed to contain digits, but they must also contain at least one alphabetic character or extra word character. To disallow digits in words, add the digits to valid_punctuation.
  example:

    allow_numbers: | true

allow_space_in_url
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    3.2.0b6 or later
  description:
    If set to true, htdig will handle URLs that contain embedded spaces. Technically, this is a violation of RFC 2396, which says spaces should be stripped out (as htdig does by default). However, many web browsers and HTML code generators violate this standard already, so enabling this attribute allows htdig to handle these non-compliant URLs. Even with this attribute set, htdig still strips out all white space (leading, trailing and embedded), except that space characters embedded within the URL will be encoded as %20.
  example:

    allow_space_in_url: | true

allow_virtual_hosts
  type:
    boolean
  used by:
    htdig
  default:
    true
  block:
    Global
  version:
    3.0.8b2 or later
  description:
    If set to true, htdig will index virtual web sites as expected. If false, all URL host names will be normalized into whatever the DNS server claims the IP address to map to. If this option is set to false, there is no way to index either "soft" or "hard" virtual web sites.
  example:

    allow_virtual_hosts: | false

anchor_target
  type:
    string
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    When the first matched word in the excerpt is linked to the closest anchor in the document, this string can be set to specify a target in the link so the resulting page is displayed in the desired frame. This value will only be used if the add_anchors_to_excerpt attribute is set to true, the EXCERPT variable is used in the output template and the excerpt is actually displayed with a link.
  example:

    anchor_target: | body

any_keywords
  type:
    boolean
  used by:
    htsearch
  default:
    false
  block:
    Global
  version:
    3.2.0b2 or later
  description:
    If set to true, the words in the keywords input parameter in the search form will be joined with logical ORs rather than ANDs, so that any of the words provided will do. Note that this has nothing to do with limiting the search to words in META keywords tags. See the search form documentation for details on this.
  example:

    any_keywords: | yes

author_factor
  type:
    number
  used by:
    htsearch
  default:
    1
  block:
    Global
  version:
    3.2.0b4 or later
  description:
    Weighting applied to words in a <meta name="author" ... > tag.
    See also heading_factor.
  example:

    author_factor: | 1

authorization
  type:
    string
  used by:
    htdig
  default:
    No default
  block:
    URL
  version:
    3.1.4 or later
  description:
    This tells htdig to send the supplied username:password with each HTTP request. The credentials will be encoded using the "Basic" authentication scheme. There must be a colon (:) between the username and password.
    This attribute can also be specified on htdig's command line using the -u option, and will be blotted out so it won't show up in a process listing. If you use it directly in a configuration file, be sure to protect it so it is readable only by you, and do not use that same configuration file for htsearch.
  example:

    authorization: | myusername:mypassword

backlink_factor
  type:
    number
  used by:
    htsearch
  default:
    0.1
  block:
    Global
  version:
    3.1.0 or later
  description:
    This is a weight of "how important" a page is, based on the number of URLs pointing to it. It's actually multiplied by the ratio of the incoming URLs (backlinks) and outgoing URLs (links on the page), to balance out pages with lots of links to pages that link back to them. The ratio gives lower weight to "link farms", which often have many links to them. This factor can be changed without changing the database in any way. However, setting this value to something other than 0 incurs a slowdown on search results.
  example:

    backlink_factor: | 501.1

bad_extensions
  type:
    string list
  used by:
    htdig
  default:
    .wav .gz .z .sit .au .zip .tar .hqx .exe .com .gif .jpg .jpeg .aiff .class .map .ram .tgz .bin .rpm .mpg .mov .avi .css
  block:
    URL
  version:
    all
  description:
    This is a list of extensions on URLs which are considered non-parsable. This list is used mainly to supplement the MIME-types that the HTTP server provides with documents. Some HTTP servers do not have a correct list of MIME-types and so can advertise certain documents as text while they are some binary format. If the list is empty, then all extensions are acceptable, provided they pass other criteria for acceptance or rejection. See also valid_extensions.
  example:

    bad_extensions: | .foo .bar .bad

bad_local_extensions
  type:
    string list
  used by:
    htdig
  default:
    .php .shtml .cgi
  block:
    URL
  version:
    all
  description:
    This is a list of extensions on URLs which must be retrieved using the URL's true transport mechanism (such as HTTP). If local_urls is specified, URLs not ending with these extensions may instead be retrieved through the local filesystem for efficiency.
  example:

    No example provided

bad_querystr
  type:
    pattern list
  used by:
    htdig
  default:
    No default
  block:
    URL
  version:
    3.1.0 or later
  description:
    This is a list of CGI query strings to be excluded from indexing. This can be used in conjunction with CGI-generated portions of a website to control which pages are indexed.
  example:

    bad_querystr: | forum=private section=topsecret&passwd=required

bad_word_list
  type:
    string
  used by:
    htdig, htsearch
  default:
    ${common_dir}/bad_words
  block:
    Global
  version:
    all
  description:
    This specifies a file which contains words which should be excluded when digging or searching. This list should include the most common words or other words that you don't want to be able to search on (things like sex or smut are examples of these.)
    The file should contain one word per line. A sample bad words file is located in the `contrib/examples` directory.
  example:

    bad_word_list: | ${common_dir}/badwords.txt

bin_dir
  type:
    string
  used by:
    all
  default:
    /usr/local/bin
  block:
    Global
  version:
    all
  description:
    This is the directory in which the executables related to ht://Dig are installed. It is never used directly by any of the programs, but other attributes can be defined in terms of this one.

    The default value of this attribute is determined at compile time.

  example:

    bin_dir: | /usr/local/bin

boolean_keywords
  type:
    string list
  used by:
    htsearch
  default:
    and or not
  block:
    Global
  version:
    3.1.6 or later
  description:
    These three strings are used as the keywords used in constructing the LOGICAL_WORDS template variable, and in parsing the words input parameter when the method parameter or match_method attribute is set to `boolean`. See also the boolean_syntax_errors attribute.
  example:

    boolean_keywords: | et ou non

boolean_syntax_errors
  type:
    quoted string list
  used by:
    htsearch
  default:
    Expected 'a search word, a quoted phrase or a boolean expression between ()' 'at the end' 'instead of' 'end of expression' quotes
  block:
    Global
  version:
    3.1.6 or later
  description:
    These six strings are used as the keywords used to construct various syntax error messages for errors encountered in parsing the words input parameter when the method parameter or match_method attribute is set to `boolean`. They are used in conjunction with the boolean_keywords attribute, and comprise all English-specific parts of these error messages. The order in which the strings are put together may not be ideal, or even gramatically correct, for all languages, but they can be used to make fairly intelligible messages in many languages.
  example:

    boolean_syntax_errors: | Attendait "un mot" "à la fin" "au lieu de" "fin d'expression" "guillemet"

build_select_lists
  type:
    quoted string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This list allows you to define any htsearch input parameter as a select list for use in templates, provided you also define the corresponding name list attribute which enumerates all the choices to put in the list. It can be used for existing input parameters, as well as any you define using the allow_in_form attribute. The entries in this list each consist of an octuple, a set of eight strings defining the variables and how they are to be used to build a select list. The attribute can contain many of these octuples. The strings in the string list are merely taken eight at a time. For each octuple of strings specified in build_select_lists, the elements have the following meaning:
    1. the name of the template variable to be defined as a list, optionally followed by a comma and the type of list, and optional formatting codes
    2. the input parameter name that the select list will set
    3. the name of the user-defined attribute containing the name list
    4. the tuple size used in the name list above
    5. the index into a name list tuple for the value
    6. the index for the corresponding label on the selector
    7. the configuration attribute where the default value for this input parameter is defined
    8. the default label, if not an empty string, which will be used as the label for an additional list item for the current input parameter value if it doesn't match any value in the given list
    See the select list documentation for more information on this attribute.
  example:

    build_select_lists: | MATCH_LIST matchesperpage matches_per_page_list \ 1 1 1 matches_per_page "Previous Amount" \ RESTRICT_LIST,multiple restrict restrict_names 2 1 2 restrict "" \ FORMAT_LIST,radio format template_map 3 2 1 template_name ""

caps_factor
  type:
    number
  used by:
    htsearch
  default:
    1
  block:
    Global
  version:
    ??
  description:
    TO BE COMPLETED
    See also heading_factor.
  example:

    caps_factor: | 1

case_sensitive
  type:
    boolean
  used by:
    htdig
  default:
    true
  block:
    Global
  version:
    3.1.0b2 or later
  description:
    This specifies whether ht://Dig should consider URLs case-sensitive or not. If your server is case-insensitive, you should probably set this to false.
    Even if this is false, common_url_parts, url_part_aliases and url_rewrite_rules are all still case sensitive, and server_aliases is still case insensitive.
  example:

    case_sensitive: | false

check_unique_date
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    Include the modification date of the page in the MD5 hash, to reduce the problem with identical but physically separate pages in different parts of the tree pointing to different pages.
  example:

    check_unique_date: | false

check_unique_md5
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    Uses the MD5 hash of pages to reject aliases, prevents multiple entries in the index caused by such things as symbolic links Note: May not do the right thing for incremental update
  example:

    check_unique_md5: | false

collection_names
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.2.0b2 or later
  description:
    This is a list of config file names that are used for searching multiple databases. Simply put, htsearch will loop through the databases specified by each of these config files and present the result of the search on all of the databases. The corresponding config files are looked up in the config_dir directory. Each listed config file must exist, as well as the corresponding databases.
  example:

    collection_names: | htdig_docs htdig_bugs

common_dir
  type:
    string
  used by:
    all
  default:
    /usr/local/share/htdig/common
  block:
    Global
  version:
    all
  description:
    Specifies the directory for files that will or can be shared among different search databases. The default value for this attribute is defined at compile time.
  example:

    common_dir: | /tmp

common_url_parts
  type:
    string list
  used by:
    all
  default:
    http:// http://www. ftp:// ftp://ftp. /pub/ .html .htm .shtml /index.html /index.htm .com/ .com mailto:
  block:
    Global
  version:
    3.1.0 or later
  description:
    Sub-strings often found in URLs stored in the database. These are replaced in the database by an internal space-saving encoding. If a string specified in url_part_aliases, overlaps any string in common_url_parts, the common_url_parts string is ignored.
    Note that when this attribute is changed, the database should be rebuilt, unless the effect of "changing" the affected URLs in the database is wanted.
  example:

    common_url_parts: | http://www.htdig.org/ml/ \ .html \ http://dev.htdig.org/ \ http://www.htdig.org/

compression_level
  type:
    integer
  used by:
    htdig
  default:
    6
  block:
    Global
  version:
    3.1.0 or later
  description:
    If non-zero and the zlib compression library was available when compiled, this attribute controls the amount of compression used in the doc_excerpt file.
    This must be in the range 0-9, and must be non-zero when wordlist_compress_zlib is used.
  example:

    compression_level: | 0

config
  type:
    string
  used by:
    all
  default:
    No default
  block:
    Global
  version:
    ??
  description:
    Name of configuration file to load. For security reasons, restrictions are placed on the values which can be specified on the command line to htsearch. The default value of this attribute is determined at compile time.
  example:

    No example provided

config_dir
  type:
    string
  used by:
    all
  default:
    /usr/local/etc/htdig
  block:
    Global
  version:
    all
  description:
    This is the directory which contains all configuration files related to ht://Dig. It is never used directly by any of the programs, but other attributes or the include directive can be defined in terms of this one.

    The default value of this attribute is determined at compile time.

  example:

    config_dir: | /var/htdig/conf

content_classifier
  type:
    string
  used by:
    htdig
  default:
    ${bin_dir}/HtFileType
  block:
    Global
  version:
    3.2.0b4 or later
  description:
    When ht://Dig can't determine the type of a `file://` URL from its extension, this program is used to determine the type. The program is called with one argument, the name of (possibly a temporary copy of) the file.

    See also mime_types.

  example:

    content_classifier: | file -i -b

cookies_input_file
  type:
    string
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.2.0b4 or later
  description:
    Specifies the location of the file used for importing cookies for the crawl. These cookies will be preloaded into htdig's in-memory cookie jar, but aren't written back to the file. Cookies are specified according to Netscape's format (tab-separated fields). If this attribute is left blank, no cookie file will be read. For more information, see the sample cookies.txt file in the ht://Dig source distribution.
  example:

    cookies_input_file: | ${common_dir}/cookies.txt

create_image_list
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    all
  description:
    If set to true, a file with all the image URLs that were seen will be created, one URL per line. This list will not be in any order and there will be lots of duplicates, so after htdig has completed, it should be piped through `sort -u` to get a unique list.
  example:

    create_image_list: | yes

create_url_list
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    all
  description:
    If set to true, a file with all the URLs that were seen will be created, one URL per line. This list will not be in any order and there will be lots of duplicates, so after htdig has completed, it should be piped through `sort -u` to get a unique list.
  example:

    create_url_list: | yes

database_base
  type:
    string
  used by:
    all
  default:
    ${database_dir}/db
  block:
    Global
  version:
    all
  description:
    This is the common prefix for files that are specific to a search database. Many different attributes use this prefix to specify filenames. Several search databases can share the same directory by just changing this value for each of the databases.
  example:

    database_base: | ${database_dir}/sales

database_dir
  type:
    string
  used by:
    all
  default:
    /usr/local/share/htdig/database
  block:
    Global
  version:
    all
  description:
    This is the directory which contains all database and other files related to ht://Dig. It is never used directly by any of the programs, but other attributes are defined in terms of this one.

    The default value of this attribute is determined at compile time.

  example:

    database_dir: | /var/htdig

date_factor
  type:
    number
  used by:
    htsearch
  default:
    0
  block:
    Global
  version:
    3.1.0 or later
  description:
    This factor, gives higher rankings to newer documents and lower rankings to older documents. Before setting this factor, it's advised to make sure your servers are returning accurate dates (check the dates returned in the long format). Additionally, setting this to a nonzero value incurs a small performance hit on searching.
  example:

    date_factor: | 0.35

date_format
  type:
    string
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.2 or later
  description:
    This format string determines the output format for modification dates of documents in the search results. It is interpreted by your system's strftime function. Please refer to your system's manual page for this function, for a description of available format codes. If this format string is empty, as it is by default, htsearch will pick a format itself. In this case, the iso_8601 attribute can be used to modify the appearance of the date.
  example:

    date_format: | %Y-%m-%d

description_factor
  type:
    number
  used by:
    htsearch
  default:
    150
  block:
    Global
  version:
    3.1.0b3 or later
  description:
    Plain old "descriptions" are the text of a link pointing to a document. This factor gives weight to the words of these descriptions of the document. Not surprisingly, these can be pretty accurate summaries of a document's content. See also heading_factor and meta_description_factor.
  example:

    description_factor: | 350

description_meta_tag_names
  type:
    string list
  used by:
    htdig
  default:
    description
  block:
    Global
  version:
    3.1.6 or later
  description:
    The words in this list are used to search for descriptions in HTML META tags. This list can contain any number of strings that each will be seen as the name for whatever description convention is used. While words in any of the specified description contents will be indexed, only the last meta tag containing a description will be kept for the variable in search results. The order in which the names are specified in this configuration attribute is irrelevant, as it is the order in which the tags appear in the documents that matters.
    The META tags have the following format:
    `<META name="somename" content="somevalue">`
    See also meta_description_factor.
  example:

    description_meta_tag_names: | "description htdig-description"

disable_cookies
  type:
    boolean
  used by:
    htdig
  default:
    true
  block:
    Server
  version:
    3.2.0b4 or later
  description:
    This option, if set to true, will disable HTTP cookies.
  example:

    disable_cookies: | true

doc_db
  type:
    string
  used by:
    all
  default:
    ${database_base}.docdb
  block:
    Global
  version:
    all
  description:
    This file will contain a Berkeley database of documents indexed by document number. It contains all the information gathered for each document, except the document excerpts which are stored in the doc_excerpt file.
  example:

    doc_db: | ${database_base}documents.db

doc_excerpt
  type:
    string
  used by:
    all
  default:
    ${database_base}.excerpts
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This file will contain a Berkeley database of document excerpts indexed by document number. It contains all the text gathered for each document, so this file can become rather large if max_head_length is set to a large value. The size can be reduced by setting the compression_level, if supported on your system.
  example:

    doc_excerpt: | ${database_base}excerpts.db

doc_index
  type:
    string
  used by:
    htdig
  default:
    ${database_base}.docs.index
  block:
    Global
  version:
    all
  description:
    This file contains a mapping of document numbers to URLs and is used by htdig during indexing. It is used on updates if it exists.
  example:

    doc_index: | documents.index.db

doc_list
  type:
    string
  used by:
    htdig, htdump, htload
  default:
    ${database_base}.docs
  block:
    Global
  version:
    all
  description:
    This file is basically a text version of the file specified in doc_db. Its only use is to have a human readable database of all documents. The file is easy to parse with tools like perl or tcl.
  example:

    doc_list: | /tmp/documents.text

endday
  type:
    integer
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    Day component of last date allowed as last-modified date of returned docutments. This is most usefully specified as a GCI argument. See also startyear.
  example:

    endday: | 31

end_ellipses
  type:
    string
  used by:
    htsearch
  default:
    <strong><code> ...</code></strong>
  block:
    Global
  version:
    all
  description:
    When excerpts are displayed in the search output, this string will be appended to the excerpt if there is text following the text displayed. This is just a visual reminder to the user that the excerpt is only part of the complete document.
  example:

    end_ellipses: | ...

end_highlight
  type:
    string
  used by:
    htsearch
  default:
    </strong>
  block:
    Global
  version:
    3.1.4 or later
  description:
    When excerpts are displayed in the search output, matched words will be highlighted using start_highlight and this string. You should ensure that highlighting tags are balanced, that is, this string should close any formatting tag opened by start_highlight.
  example:

    end_highlight: | </font>

endings_affix_file
  type:
    string
  used by:
    htfuzzy
  default:
    ${common_dir}/english.aff
  block:
    Global
  version:
    all
  description:
    Specifies the location of the file which contains the affix rules used to create the endings search algorithm databases. Consult the documentation on htfuzzy for more information on the format of this file.
  example:

    endings_affix_file: | /var/htdig/affix_rules

endings_dictionary
  type:
    string
  used by:
    htfuzzy
  default:
    ${common_dir}/english.0
  block:
    Global
  version:
    all
  description:
    Specifies the location of the file which contains the dictionary used to create the endings search algorithm databases. Consult the documentation on htfuzzy for more information on the format of this file.
  example:

    endings_dictionary: | /var/htdig/dictionary

endings_root2word_db
  type:
    string
  used by:
    htfuzzy, htsearch
  default:
    ${common_dir}/root2word.db
  block:
    Global
  version:
    all
  description:
    This attributes specifies the database filename to be used in the 'endings' fuzzy search algorithm. The database maps word roots to all legal words with that root. For more information about this and other fuzzy search algorithms, consult the htfuzzy documentation.
    Note that the default value uses the common_dir attribute instead of the database_dir attribute. This is because this database can be shared with different search databases.
  example:

    endings_root2word_db: | /var/htdig/r2w.db

endings_word2root_db
  type:
    string
  used by:
    htfuzzy, htsearch
  default:
    ${common_dir}/word2root.db
  block:
    Global
  version:
    all
  description:
    This attributes specifies the database filename to be used in the 'endings' fuzzy search algorithm. The database maps words to their root. For more information about this and other fuzzy search algorithms, consult the htfuzzy documentation.
    Note that the default value uses the common_dir attribute instead of the database_dir attribute. This is because this database can be shared with different search databases.
  example:

    endings_word2root_db: | /var/htdig/w2r.bm

endmonth
  type:
    integer
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    Month component of last date allowed as last-modified date of returned docutments. This is most usefully specified as a GCI argument. See also startyear.
  example:

    endmonth: | 12

endyear
  type:
    integer
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    Year component of last date allowed as last-modified date of returned docutments. This is most usefully specified as a GCI argument. See also startyear.
  example:

    endyear: | 2002

excerpt_length
  type:
    integer
  used by:
    htsearch
  default:
    300
  block:
    Global
  version:
    all
  description:
    This is the maximum number of characters the displayed excerpt will be limited to. The first matched word will be highlighted in the middle of the excerpt so that there is some surrounding context.
    The start_ellipses and end_ellipses are used to indicate that the document contains text before and after the displayed excerpt respectively. The start_highlight and end_highlight are used to specify what formatting tags are used to highlight matched words.
  example:

    excerpt_length: | 500

excerpt_show_top
  type:
    boolean
  used by:
    htsearch
  default:
    false
  block:
    Global
  version:
    all
  description:
    If set to true, the excerpt of a match will always show the top of the matching document. If it is false (the default), the excerpt will attempt to show the part of the document that actually contains one of the words.
  example:

    excerpt_show_top: | yes

exclude
  type:
    pattern list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.2.0b4 or later
  description:
    If a URL contains any of the space separated patterns, it will be discarded in the searching phase. This is used to exclude certain URLs from search results. The list can be specified from within the configuration file, and can be overridden with the "exclude" input parameter in the search form.
  example:

    exclude: | myhost.com/mailarchive/

exclude_urls
  type:
    pattern list
  used by:
    htdig
  default:
    /cgi-bin/ .cgi
  block:
    URL
  version:
    all
  description:
    If a URL contains any of the space separated patterns, it will be rejected. This is used to exclude such common things such as an infinite virtual web-tree which start with cgi-bin.
  example:

    exclude_urls: | students.html cgi-bin

external_parsers
  type:
    quoted string list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.0.7 or later
  description:
    This attribute is used to specify a list of content-type/parsers that are to be used to parse documents that cannot by parsed by any of the internal parsers. The list of external parsers is examined before the builtin parsers are checked, so this can be used to override the internal behavior without recompiling htdig.
    The external parsers are specified as pairs of strings. The first string of each pair is the content-type that the parser can handle while the second string of each pair is the path to the external parsing program. If quoted, it may contain parameters, separated by spaces.
    External parsing can also be done with external converters, which convert one content-type to another. To do this, instead of just specifying a single content-type as the first string of a pair, you specify two types, in the form type1->type2, as a single string with no spaces. The second string will define an external converter rather than an external parser, to convert the first type to the second. If the second type is user-defined, then it's up to the converter script to put out a "Content-Type: type" header followed by a blank line, to indicate to htdig what type it should expect for the output, much like what a CGI script would do. The resulting content-type must be one that htdig can parse, either internally, or with another external parser or converter.
    Only one external parser or converter can be specified for any given content-type. However, an external converter for one content-type can be chained to the internal parser for the same type, by appending -internal to the second type string (e.g. text/html->text/html-internal) to perform external preprocessing on documents of this type before internal parsing. There are two internal parsers, for text/html and text/plain.

    The parser program takes four command-line parameters, not counting any parameters already given in the command string:
    infile content-type URL configuration-file

    Parameter | Description | Example
    --- | --- | ---
    infile | A temporary file with the contents to be parsed. | /var/tmp/htdext.14242
    content-type | The MIME-type of the contents. | text/html
    URL | The URL of the contents. | http://www.htdig.org/attrs.html
    configuration-file | The configuration-file in effect. | /etc/htdig/htdig.conf

    The external parser is to write information for htdig on its standard output. Unless it is an external converter, which will output a document of a different content-type, then its output must follow the format described here.
    The output consists of records, each record terminated with a newline. Each record is a series of (unless expressively allowed to be empty) non-empty tab-separated fields. The first field is a single character that specifies the record type. The rest of the fields are determined by the record type.

    Record type | Fields | Description
    --- | --- | ---
    w | word | A word that was found in the document.
    location | A number indicating the normalized location of the word within the document. The number has to fall in the range 0-1000 where 0 means the top of the document.
    heading level | A heading level that is used to compute the weight of the word depending on its context in the document itself. The level is in the range of 0-11 and are defined as follows: 0 Normal text 1 Title text 2 Heading 1 text 3 Heading 2 text 4 Heading 3 text 5 Heading 4 text 6 Heading 5 text 7 Heading 6 text 8 text alternative to images 9 Keywords 10 Meta-description 11 Author
    u | document URL | A hyperlink to another document that is referenced by the current document. It must be complete and non-relative, using the URL parameter to resolve any relative references found in the document.
    hyperlink description | For HTML documents, this would be the text between the <a href...> and </a> tags.
    t | title | The title of the document
    h | head | The top of the document itself. This is used to build the excerpt. This should only contain normal ASCII text
    a | anchor | The label that identifies an anchor that can be used as a target in an URL. This really only makes sense for HTML documents.
    i | image URL | An URL that points at an image that is part of the document.
    m | http-equiv | The HTTP-EQUIV attribute of a META tag. May be empty.
    name | The NAME attribute of this META tag. May be empty.
    contents | The CONTENTS attribute of this META tag. May be empty.

    See also FAQ questions 4.8 and 4.9 for more examples.

  example:

    external_parsers: | text/html /usr/local/bin/htmlparser \ application/pdf /usr/local/bin/parse_doc.pl \ application/msword->text/plain "/usr/local/bin/mswordtotxt -w" \ application/x-gunzip->user-defined /usr/local/bin/ungzipper

external_protocols
  type:
    quoted string list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This attribute is a bit like external_parsers since it specifies a list of protocols/handlers that are used to download documents that cannot be retrieved using the internal methods. This enables htdig to index documents with URL schemes it does not understand, or to use more advanced authentication for the documents it is retrieving. This list is checked before HTTP or other methods, so this can override the internal behavior without writing additional code for htdig.
    The external protocols are specified as pairs of strings, the first being the URL scheme that the script can handle while the second is the path to the script itself. If the second is quoted, then additional command-line arguments may be given.
    If the external protocol does not contain a colon (:), it is assumed to have the standard format "protocol://[usr[:password]@]address[:port]/path". If it ends with a colon, then it is assumed to have the simpler format "protocol:path". If it ends with "://" then the standard form is again assumed.
    The program takes three command-line parameters, not counting any parameters already given in the command string:
    protocol URL configuration-file

    Parameter | Description | Example
    --- | --- | ---
    protocol | The URL scheme to be used. | https
    URL | The URL to be retrieved. | https://www.htdig.org:8008/attrs.html
    configuration-file | The configuration-file in effect. | /etc/htdig/htdig.conf

    The external protocol script is to write information for htdig on the standard output. The output must follow the form described here. The output consists of a header followed by a blank line, followed by the contents of the document. Each record in the header is terminated with a newline. Each record is a series of (unless expressively allowed to be empty) non-empty tab-separated fields. The first field is a single character that specifies the record type. The rest of the fields are determined by the record type.

    Record type | Fields | Description
    --- | --- | ---
    s | status code | An HTTP-style status code, e.g. 200, 404. Typical codes include: 200 Successful retrieval 304 Not modified (for example, if the document hasn't changed since the last dig) 301 Redirect (to another URL) 401 Not authorized 404 Not found
    r | reason | A text string describing the status code, e.g "Redirect" or "Not Found."
    m | status code | The modification time of this document. While the code is fairly flexible about the time/date formats it accepts, it is recommended to use something standard, like RFC1123: Sun, 06 Nov 1994 08:49:37 GMT, or ISO-8601: 1994-11-06 08:49:37 GMT.
    t | content-type | A valid MIME type for the document, like text/html or text/plain.
    l | content-length | The length of the document on the server, which may not necessarily be the length of the buffer returned.
    u | url | The URL of the document, or in the case of a redirect, the URL that should be indexed as a result of the redirect.

  example:

    external_protocols: | https /usr/local/bin/handler.pl \ ftp /usr/local/bin/ftp-handler.pl

extra_word_characters
  type:
    string
  used by:
    htdig, htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.2 or later
  description:
    These characters are considered part of a word. In contrast to the characters in the valid_punctuation attribute, they are treated just like letter characters. See also the allow_numbers attribute.
    Note that the locale attribute is normally used to configure which characters constitute letter characters.
    Note also that it is an error to have characters in both extra_word_characters and valid_punctuation. To add one of the characters in the default valid_punctuation to extra_word_characters, an explicit valid_punctuation entry must be added to the configuration file.
    See also the comments about special characters at valid_punctuation.
  example:

    extra_word_characters: | _

head_before_get
  type:
    boolean
  used by:
    htdig
  default:
    true
  block:
    Server
  version:
    3.2.0b1 or later
  description:
    If set to true, an HTTP/1.1 HEAD call is made in order to retrieve header information about a document. If the status code and the content-type returned show that the document is parsable, then a subsequent 'GET' call is made. In general, it is recommended that this attribute be set to 'true', as it can really improve performance (especially when used with persistent connections). This is particularly so during an incremental dig, since in this case 'htdig' can ask the server if the document has been modified since last dig. However there are a few cases when it is better to switch it off:
    - the majority of documents are parsable (HTML or a type for which an external parser has been provided) and must be retrieved anyway (initial dig);
    - the server does not support the HEAD method or it is disabled;
    - in some cases persistent_connections may not work properly and either the 'head_before_get' attribute or the 'persistent_connections' attribute must be turned off.
  example:

    head_before_get: | false

heading_factor
  type:
    number
  used by:
    htsearch
  default:
    5
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This is a factor which will be used to multiply the weight of words between <h1> and </h1> tags, as well as headings of levels <h2> through <h6>. It is used to assign the level of importance to headings. Setting a factor to 0 will cause words in these headings to be ignored. The number may be a floating point number. See also author_factor backlink_factor caps_factor date_factor description_factor keywords_factor meta_description_factor text_factor title_factor url_text_factor
  example:

    heading_factor: | 20

htnotify_prefix_file
  type:
    string
  used by:
    htnotify
  default:
    No default
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    Specifies the file containing text to be inserted in each mail message sent by htnotify before the list of expired webpages. If omitted, nothing is inserted.
  example:

    htnotify_prefix_file: | ${common_dir}/notify_prefix.txt

htnotify_replyto
  type:
    string
  used by:
    htnotify
  default:
    No default
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    This specifies the email address that htnotify email messages include in the Reply-to: field.
  example:

    htnotify_replyto: | design-group@foo.com

htnotify_sender
  type:
    string
  used by:
    htnotify
  default:
    webmaster@www
  block:
    Global
  version:
    all
  description:
    This specifies the email address that htnotify email messages get sent out from. The address is forged using /usr/lib/sendmail. Check htnotify/htnotify.cc for detail on how this is done.
  example:

    htnotify_sender: | bigboss@yourcompany.com

htnotify_suffix_file
  type:
    string
  used by:
    htnotify
  default:
    No default
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    Specifies the file containing text to be inserted in each mail message sent by htnotify after the list of expired webpages. If omitted, htnotify will insert a standard message.
  example:

    htnotify_suffix_file: | ${common_dir}/notify_suffix.txt

htnotify_webmaster
  type:
    string
  used by:
    htnotify
  default:
    ht://Dig Notification Service
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    This provides a name for the From field, in addition to the email address for the email messages sent out by htnotify.
  example:

    htnotify_webmaster: | Notification Service

http_proxy
  type:
    string
  used by:
    htdig
  default:
    No default
  block:
    URL
  version:
    3.0 or later
  description:
    When this attribute is set, all HTTP document retrievals will be done using the HTTP-PROXY protocol. The URL specified in this attribute points to the host and port where the proxy server resides.
    Later, this should be able to be overridden by the `http_proxy` environement variable, but it currently cannot. The use of a proxy server greatly improves performance of the indexing process.
    See also http_proxy_authorization and #http_proxy_exclude.
  example:

    http_proxy: | http://proxy.bigbucks.com:3128

http_proxy_authorization
  type:
    string
  used by:
    htdig
  default:
    No default
  block:
    URL
  version:
    3.2.0b4 or later
  description:
    This tells htdig to send the supplied username:password with each HTTP request, when using a proxy with authorization requested. The credentials will be encoded using the "Basic" authentication scheme. There must be a colon (:) between the username and password.
    If you use this option, be sure to protect the configuration file so it is readable only by you, and do not use that same configuration file for htsearch.
  example:

    http_proxy_authorization: | myusername:mypassword

http_proxy_exclude
  type:
    pattern list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.1.0b3 or later
  description:
    When this is set, URLs matching this will not use the proxy. This is useful when you have a mixture of sites near to the digging server and far away.
  example:

    http_proxy_exclude: | http://intranet.foo.com/

ignore_alt_text
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    3.1.6 or later
  description:
    If set, this causes the text of the ALT field in an <IMG...> tag not to be indexed as part of the text of the document, nor included in excerpts.
  example:

    ignore_alt_text: | true

ignore_dead_servers
  type:
    boolean
  used by:
    htdig
  default:
    true
  block:
    Global
  version:
    3.1.6 or later
  description:
    Determines whether htdig will continue to index URLs from a server after an attempted connection to the server fails as "no host found" or "host not found (port)." If set to false, htdig will try every URL from that server.
  example:

    ignore_dead_servers: | false

image_list
  type:
    string
  used by:
    htdig
  default:
    ${database_base}.images
  block:
    Global
  version:
    all
  description:
    This is the file that a list of image URLs gets written to by htdig when the create_image_list is set to true. As image URLs are seen, they are just appended to this file, so after htdig finishes it is probably a good idea to run `sort -u` on the file to eliminate duplicates from the file.
  example:

    image_list: | allimages

image_url_prefix
  type:
    string
  used by:
    htsearch
  default:
    /icons/htdig
  block:
    Global
  version:
    all
  description:
    This specifies the directory portion of the URL used to display star images. This attribute isn't directly used by htsearch, but is used in the default URL for the star_image and star_blank attributes, and other attributes may be defined in terms of this one.

    The default value of this attribute is determined at compile time.

  example:

    image_url_prefix: | /images/htdig

include
  type:
    string
  used by:
    all
  default:
    No default
  block:
    Global
  version:
    3.1.0 or later
  description:
    This is not quite a configuration attribute, but rather a directive. It can be used within one configuration file to include the definitions of another file. The last definition of an attribute is the one that applies, so after including a file, any of its definitions can be overridden with subsequent definitions. This can be useful when setting up many configurations that are mostly the same, so all the common attributes can be maintained in a single configuration file. The include directives can be nested, but watch out for nesting loops.
  example:

    include: | ${config_dir}/htdig.conf

iso_8601
  type:
    boolean
  used by:
    htsearch, htnotify
  default:
    false
  block:
    Global
  version:
    3.1.0b2 or later
  description:
    This sets whether dates should be output in ISO 8601 format. For example, this was written on: 1998-10-31 11:28:13 EST. See also the date_format attribute, which can override any date format that htsearch picks by default.
    This attribute also affects the format of the date htnotify expects to find in a htdig-notification-date field.
  example:

    iso_8601: | true

keywords
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    ??
  description:
    Keywords which must be found on all pages returned, even if the "or" ("Any") method is selected.
  example:

    keywords: | documentation

keywords_factor
  type:
    number
  used by:
    htsearch
  default:
    100
  block:
    Global
  version:
    all
  description:
    This is a factor which will be used to multiply the weight of words in the list of meta keywords of a document. The number may be a floating point number. See also the heading_factor attribute.
  example:

    keywords_factor: | 12

keywords_meta_tag_names
  type:
    string list
  used by:
    htdig
  default:
    keywords htdig-keywords
  block:
    Global
  version:
    3.0.6 or later
  description:
    The words in this list are used to search for keywords in HTML META tags. This list can contain any number of strings that each will be seen as the name for whatever keyword convention is used.
    The META tags have the following format:
    `<META name="somename" content="somevalue">`
  example:

    keywords_meta_tag_names: | keywords description

limit_normalized
  type:
    pattern list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.1.0b2 or later
  description:
    This specifies a set of patterns that all URLs have to match against in order for them to be included in the search. Unlike the limit_urls_to attribute, this is done after the URL is normalized and the server_aliases attribute is applied. This allows filtering after any hostnames and DNS aliases are resolved. Otherwise, this attribute is the same as the limit_urls_to attribute.
  example:

    limit_normalized: | http://www.mydomain.com

limit_urls_to
  type:
    pattern list
  used by:
    htdig
  default:
    ${start_url}
  block:
    Global
  version:
    all
  description:
    This specifies a set of patterns that all URLs have to match against in order for them to be included in the search. Any number of strings can be specified, separated by spaces. If multiple patterns are given, at least one of the patterns has to match the URL.
    Matching, by default, is a case-sensitive string match on the URL to be used, unless the case_sensitive attribute is false. The match will be performed after the relative references have been converted to a valid URL. This means that the URL will always start with a transport specifier (`http://` if none is specified).
    Granted, this is not the perfect way of doing this, but it is simple enough and it covers most cases.
    To limit URLs in htsearch, use restrict.
  example:

    limit_urls_to: | .sdsu.edu kpbs [.*\.html]

local_default_doc
  type:
    string list
  used by:
    htdig
  default:
    index.html
  block:
    Server
  version:
    3.0.8b2 or later
  description:
    Set this to the default documents in a directory used by the server. This is used for local filesystem access, using local_urls, to translate URLs like http://foo.com/ into something like /home/foo.com/index.html (see also remove_default_doc).
    The list should only contain names that the local server recognizes as default documents for directory URLs, as defined by the DirectoryIndex setting in Apache's srm.conf, for example. As of version 3.1.5, this can be a string list rather than a single name, and htdig will use the first name that works. Since this requires a loop, setting the most common name first will improve performance. Special characters can be embedded in these names using %xx hex encoding.
  example:

    local_default_doc: | default.html default.htm index.html index.htm

local_urls
  type:
    string list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.0.8b2 or later
  description:
    Set this to tell ht://Dig to access certain URLs through local filesystems. At first ht://Dig will try to access pages with URLs matching the patterns through the filesystems specified. If it cannot find the file, or if it doesn't recognize the file name extension, it will try the URL through HTTP instead. Note the example--the equal sign and the final slashes in both the URL and the directory path are critical.
    The fallback to HTTP can be disabled by setting the local_urls_only attribute to true. To access user directory URLs through the local filesystem, set local_user_urls. File types which need processing by the HTTP server may be specified by the bad_local_extensions attribute. As of version 3.1.5, you can provide multiple mappings of a given URL to different directories, and htdig will use the first mapping that works. Special characters can be embedded in these names using %xx hex encoding. For example, you can use %3D to embed an "=" sign in an URL pattern.
    See also local_default_doc.
  example:

    local_urls: | http://www.foo.com/=/usr/www/htdocs/

local_urls_only
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    3.1.4 or later
  description:
    Set this to tell ht://Dig to access files only through the local filesystem, for URLs matching the patterns in the local_urls or local_user_urls attribute. If it cannot find the file, it will give up rather than trying HTTP or another protocol. With this option, even `file://` urls are not retrieved, except throught the local_urls mechanism.
  example:

    local_urls_only: | true

local_user_urls
  type:
    string list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.0.8b2 or later
  description:
    Set this to access user directory URLs through the local filesystem. If you leave the "path" portion out, it will look up the user's home directory in /etc/password (or NIS or whatever). As with local_urls, if the files are not found, ht://Dig will try with HTTP or the appropriate protocol. Again, note the example's format. To map http://www.my.org/~joe/foo/bar.html to /home/joe/www/foo/bar.html, try the example below.
    The fallback to HTTP can be disabled by setting the local_urls_only attribute to true. As of version 3.1.5, you can provide multiple mappings of a given URL to different directories, and htdig will use the first mapping that works. Special characters can be embedded in these names using %xx hex encoding. For example, you can use %3D to embed an "=" sign in an URL pattern.
  example:

    local_user_urls: | http://www.my.org/=/home/,/www/

locale
  type:
    string
  used by:
    htdig
  default:
    C
  block:
    Global
  version:
    3.0 or later
  description:
    Set this to whatever locale you want your search database cover. It affects the way international characters are dealt with. On most systems a list of legal locales can be found in /usr/lib/locale. Also check the setlocale(3C) man page. Note that depending the locale you choose, and whether your system's locale implementation affects floating point input, you may need to specify the decimal point as a comma rather than a period. This will affect settings of search_algorithm and any of the scoring factors.
  example:

    locale: | en_US

logging
  type:
    boolean
  used by:
    htsearch
  default:
    false
  block:
    Global
  version:
    3.1.0b2 or later
  description:
    This sets whether htsearch should use the syslog() to log search requests. If set, this will log requests with a default level of LOG_INFO and a facility of LOG_LOCAL5. For details on redirecting the log into a separate file or other actions, see the syslog.conf(5) man page. To set the level and facility used in logging, change LOG_LEVEL and LOG_FACILITY in the include/htconfig.h file before compiling.
    Each line logged by htsearch contains the following:
      REMOTE_ADDR [config] (match_method) [words] [logicalWords] (matches/matches_per_page) - page, HTTP_REFERER
    where any of the above are null or empty, it either puts in '-' or 'default' (for config).
  example:

    logging: | true

maintainer
  type:
    string
  used by:
    htdig
  default:
    bogus@unconfigured.htdig.user
  block:
    Server
  version:
    all
  description:
    This should be the email address of the person in charge of the digging operation. This string is added to the user-agent: field when the digger sends a request to a server.
  example:

    maintainer: | ben.dover@uptight.com

match_method
  type:
    string
  used by:
    htsearch
  default:
    and
  block:
    Global
  version:
    3.0 or later
  description:
    This is the default method for matching that htsearch uses. The valid choices are:
    - or
    - and
    - boolean
    This attribute will only be used if the HTML form that calls htsearch didn't have the method value set.
  example:

    match_method: | boolean

matches_per_page
  type:
    integer
  used by:
    htsearch
  default:
    10
  block:
    Global
  version:
    3.0 or later
  description:
    If this is set to a relatively small number, the matches will be shown in pages instead of all at once. This attribute will only be used if the HTML form that calls htsearch didn't have the matchesperpage value set.
  example:

    matches_per_page: | 999

max_connection_requests
  type:
    integer
  used by:
    htdig
  default:
    -1
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This attribute tells htdig to limit the number of requests it will send to a server using a single, persistent HTTP connection. This only applies when the persistent_connections attribute is set. You may set the limit as high as you want, but it must be at least 1. A value of -1 specifies no limit. Requests in the queue for a server will be combined until either the limit is reached, or the queue is empty.
  example:

    max_connection_requests: | 100

max_description_length
  type:
    integer
  used by:
    htdig
  default:
    60
  block:
    Global
  version:
    all
  description:
    While gathering descriptions of URLs, htdig will only record up to this many bytes of hyperlink descriptions for use in the DESCRIPTION template variable. This is used mostly to deal with broken HTML. (If a hyperlink is not terminated with a </a> the description will go on until the end of the document.)
  example:

    max_description_length: | 40

max_descriptions
  type:
    integer
  used by:
    htdig
  default:
    5
  block:
    Global
  version:
    all
  description:
    While gathering descriptions of URLs for the DESCRIPTIONS template variable, htdig will only record up to this number of descriptions, in the order in which it encounters them. This is used to prevent the database entry for a document from growing out of control if the document has a huge number of links to it.
    Note that all descriptions are used for indexing.
  example:

    max_descriptions: | 1

max_doc_size
  type:
    integer
  used by:
    htdig
  default:
    100000
  block:
    URL
  version:
    3.0 or later
  description:
    This is the upper limit to the amount of data retrieved for documents (in bytes). This is mainly used to prevent unreasonable memory consumption since each document will be read into memory by htdig.
  example:

    max_doc_size: | 5000000

max_excerpts
  type:
    integer
  used by:
    htsearch
  default:
    1
  block:
    URL
  version:
    3.1.6 or later
  description:
    This value determines the maximum number of excerpts that can be displayed for one matching document in the search results.
  example:

    max_excerpts: | 10

max_head_length
  type:
    integer
  used by:
    htdig
  default:
    512
  block:
    Global
  version:
    all
  description:
    For each document retrieved, the top of the document is stored. This attribute determines the size of this block (in bytes). The text that will be stored is only the text; no markup is stored.
    We found that storing 50,000 bytes will store about 95% of all the documents completely. This really depends on how much storage is available and how much you want to show. Currently, this is must not be 0.
  example:

    max_head_length: | 50000

max_hop_count
  type:
    integer
  used by:
    htdig
  default:
    999999
  block:
    Global
  version:
    all
  description:
    Instead of limiting the indexing process by URL pattern, it can also be limited by the number of hops or clicks a document is removed from the starting URL.
    The starting page or pages will have hop count 0.
  example:

    max_hop_count: | 4

max_keywords
  type:
    integer
  used by:
    htdig
  default:
    -1
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This attribute can be used to limit the number of keywords per document that htdig will accept from meta keywords tags. A value of -1 or less means no limit. This can help combat meta keyword spamming, by limiting the amount of keywords that will be indexed, but it will not completely prevent irrelevant matches in a search if the first few keywords in an offending document are not relevant to its contents.
  example:

    max_keywords: | 10

max_meta_description_length
  type:
    integer
  used by:
    htdig
  default:
    512
  block:
    Global
  version:
    3.1.0b1 or later
  description:
    While gathering descriptions from meta description tags, htdig will only store up to this much of the text (in bytes) for each document to fill the METADESCRIPTION template variable. All words in the meta description are still used for indexing.
  example:

    max_meta_description_length: | 1000

max_prefix_matches
  type:
    integer
  used by:
    htsearch
  default:
    1000
  block:
    Global
  version:
    3.1.0b1 or later
  description:
    The Prefix fuzzy algorithm could potentially match a very large number of words. This value limits the number of words each prefix can match. Note that this does not limit the number of documents that are matched in any way.
  example:

    max_prefix_matches: | 100

max_retries
  type:
    integer
  used by:
    htdig
  default:
    3
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This option set the maximum number of retries when retrieving a document fails (mainly for reasons of connection).
  example:

    max_retries: | 6

max_stars
  type:
    integer
  used by:
    htsearch
  default:
    4
  block:
    Global
  version:
    all
  description:
    When stars are used to display the score of a match, this value determines the maximum number of stars that can be displayed.
  example:

    max_stars: | 6

maximum_page_buttons
  type:
    integer
  used by:
    htsearch
  default:
    ${maximum_pages}
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    This value limits the number of page links that will be included in the page list at the bottom of the search results page. By default, it takes on the value of the maximum_pages attribute, but you can set it to something lower to allow more pages than buttons. In this case, pages above this number will have no corresponding button.
  example:

    maximum_page_buttons: | 20

maximum_pages
  type:
    integer
  used by:
    htsearch
  default:
    10
  block:
    Global
  version:
    all
  description:
    This value limits the number of page links that will be included in the page list at the bottom of the search results page. As of version 3.1.4, this will limit the total number of matching documents that are shown. You can make the number of page buttons smaller than the number of allowed pages by setting the maximum_page_buttons attribute.
  example:

    maximum_pages: | 20

maximum_word_length
  type:
    integer
  used by:
    htdig, htsearch, htfuzzy
  default:
    32
  block:
    Global
  version:
    3.1.3 or later
  description:
    This sets the maximum length of words that will be indexed. Words longer than this value will be silently truncated when put into the index, or searched in the index.
  example:

    maximum_word_length: | 15

md5_db
  type:
    string
  used by:
    htdig
  default:
    ${database_base}.md5hash.db
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    This file holds a database of md5 and date hashes of pages to catch and eliminate duplicates of pages. See also the check_unique_md5 and check_unique_date attributes.
  example:

    md5_db: | ${database_base}.md5.db

meta_description_factor
  type:
    number
  used by:
    htsearch
  default:
    50
  block:
    Global
  version:
    3.1.0b1 or later
  description:
    This is a factor which will be used to multiply the weight of words in any META description tags in a document. The number may be a floating point number. See also the heading_factor attribute and the description_factor attribute.
  example:

    meta_description_factor: | 20

metaphone_db
  type:
    string
  used by:
    htfuzzy, htsearch
  default:
    ${database_base}.metaphone.db
  block:
    Global
  version:
    all
  description:
    The database file used for the fuzzy "metaphone" search algorithm. This database is created by htfuzzy and used by htsearch.
  example:

    metaphone_db: | ${database_base}.mp.db

method_names
  type:
    quoted string list
  used by:
    htsearch
  default:
    and All or Any boolean Boolean
  block:
    Global
  version:
    all
  description:
    These values are used to create the method menu. It consists of pairs. The first element of each pair is one of the known methods, the second element is the text that will be shown in the menu for that method. This text needs to be quoted if it contains spaces. See the select list documentation for more information on how this attribute is used.
  example:

    method_names: | or Or and And

mime_types
  type:
    string
  used by:
    htdig
  default:
    ${config_dir}/mime.types
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This file is used by htdig for local file access and resolving file:// URLs to ensure the files are parsable. If you are running a webserver with its own MIME file, you should set this attribute to point to that file.

    See also content_classifier.

  example:

    mime_types: | /etc/mime.types

minimum_prefix_length
  type:
    integer
  used by:
    htsearch
  default:
    1
  block:
    Global
  version:
    3.1.0b1 or later
  description:
    This sets the minimum length of prefix matches used by the "prefix" fuzzy matching algorithm. Words shorter than this will not be used in prefix matching.
  example:

    minimum_prefix_length: | 2

minimum_speling_length
  type:
    integer
  used by:
    htsearch
  default:
    5
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This sets the minimum length of words used by the "speling" fuzzy matching algorithm. Words shorter than this will not be used in this fuzzy matching.
  example:

    minimum_speling_length: | 3

minimum_word_length
  type:
    integer
  used by:
    htdig, htsearch
  default:
    3
  block:
    Global
  version:
    all
  description:
    This sets the minimum length of words that will be indexed. Words shorter than this value will be silently ignored but still put into the excerpt.
    Note that by making this value less than 3, a lot more words that are very frequent will be indexed. It might be advisable to add some of these to the bad_words list.
  example:

    minimum_word_length: | 2

multimatch_factor
  type:
    number
  used by:
    htsearch
  default:
    1
  block:
    Global
  version:
    3.1.6 or later
  description:
    This factor gives higher rankings to documents that have more than one matching search word when the or match_method is used. In version 3.1.6, the matching words' combined scores were multiplied by this factor for each additional matching word. Currently, this multiplier is applied at most once.
  example:

    multimatch_factor: | 1000

next_page_text
  type:
    string
  used by:
    htsearch
  default:
    [next]
  block:
    Global
  version:
    3.1.0 or later
  description:
    The text displayed in the hyperlink to go to the next page of matches.
  example:

    next_page_text: | <img src="/htdig/buttonr.gif">

no_excerpt_show_top
  type:
    boolean
  used by:
    htsearch
  default:
    false
  block:
    Global
  version:
    3.1.0b3 or later
  description:
    If no excerpt is available, this option will act the same as excerpt_show_top, that is, it will show the top of the document.
  example:

    no_excerpt_show_top: | yes

no_excerpt_text
  type:
    string
  used by:
    htsearch
  default:
    <em>(None of the search words were found in the top of this document.)</em>
  block:
    Global
  version:
    3.0 or later
  description:
    This text will be displayed in place of the excerpt if there is no excerpt available. If this attribute is set to nothing (blank), the excerpt label will not be displayed in this case.
  example:

    no_excerpt_text:

no_next_page_text
  type:
    string
  used by:
    htsearch
  default:
    ${next_page_text}
  block:
    Global
  version:
    3.0 or later
  description:
    The text displayed where there would normally be a hyperlink to go to the next page of matches.
  example:

    no_next_page_text:

no_page_list_header
  type:
    string
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.0 or later
  description:
    This text will be used as the value of the PAGEHEADER variable, for use in templates or the search_results_footer file, when all search results fit on a single page.
  example:

    no_page_list_header: | <hr noshade size=2>All results on this page.<br>

no_page_number_text
  type:
    quoted string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.0 or later
  description:
    The text strings in this list will be used when putting together the PAGELIST variable, for use in templates or the search_results_footer file, when search results fit on more than page. The PAGELIST is the list of links at the bottom of the search results page. There should be as many strings in the list as there are pages allowed by the maximum_page_buttons attribute. If there are not enough, or the list is empty, the page numbers alone will be used as the text for the links. An entry from this list is used for the current page, as the current page is shown in the page list without a hypertext link, while entries from the page_number_text list are used for the links to other pages. The text strings can contain HTML tags to highlight page numbers or embed images. The strings need to be quoted if they contain spaces.
  example:

    no_page_number_text: | <strong>1</strong> <strong>2</strong> \ <strong>3</strong> <strong>4</strong> \ <strong>5</strong> <strong>6</strong> \ <strong>7</strong> <strong>8</strong> \ <strong>9</strong> <strong>10</strong>

no_prev_page_text
  type:
    string
  used by:
    htsearch
  default:
    ${prev_page_text}
  block:
    Global
  version:
    3.0 or later
  description:
    The text displayed where there would normally be a hyperlink to go to the previous page of matches.
  example:

    no_prev_page_text:

no_title_text
  type:
    string
  used by:
    htsearch
  default:
    filename
  block:
    Global
  version:
    3.1.0 or later
  description:
    This specifies the text to use in search results when no title is found in the document itself. If it is set to filename, htsearch will use the name of the file itself, enclosed in brackets (e.g. [index.html]).
  example:

    no_title_text: | "No Title Found"

noindex_end
  type:
    quoted string list
  used by:
    htdig
  default:
    <!--/htdig_noindex--> </SCRIPT>
  block:
    Global
  version:
    3.1.0 or later
  description:
    This string marks the end of a section of an HTML file that should be completely ignored when indexing. Note that text between noindex_start and noindex_end isn't even counted as white space; the text "`foosomethingbar`" matches the word "foobar", not the phrase "foo bar". White space following noindex_end is counted as white space. See also noindex_start.
  example:

    noindex_end: | </SCRIPT>

noindex_start
  type:
    quoted string list
  used by:
    htdig
  default:
    <!--htdig_noindex--> <SCRIPT
  block:
    Global
  version:
    3.1.0 or later
  description:
    These strings mark the start of a section of an HTML file that should be completely ignored when indexing. They work together with noindex_end. Once a string in noindex_start is found, text is ignored until the string at the same position within noindex_end is encountered. The sections marked off this way cannot overlap. As in the first default pattern, this can be SGML comment declarations that can be inserted anywhere in the documents to exclude different sections from being indexed. However, existing tags can also be used; this is especially useful to exclude some sections from being indexed where the files to be indexed can not be edited. The second default pattern shows how SCRIPT sections in 'uneditable' documents can be skipped; note how noindex_start does not contain an ending >: this allows for all SCRIPT tags to be matched regardless of attributes defined (different types or languages). Note that the match for this string is case insensitive.
  example:

    noindex_start: | <SCRIPT

nothing_found_file
  type:
    string
  used by:
    htsearch
  default:
    ${common_dir}/nomatch.html
  block:
    Global
  version:
    all
  description:
    This specifies the file which contains the `HTML` text to display when no matches were found. The file should contain a complete `HTML` document.
    Note that this attribute could also be defined in terms of database_base to make is specific to the current search database.
  example:

    nothing_found_file: | /www/searching/nothing.html

nph
  type:
    boolean
  used by:
    htsearch
  default:
    false
  block:
    Global
  version:
    3.2.0b2 or later
  description:
    This attribute determines whether htsearch sends out full HTTP headers as required for an NPH (non-parsed header) CGI. Some servers assume CGIs will act in this fashion, for example MS IIS. If your server does not send out full HTTP headers, you should set this to true.
  example:

    nph: | true

page_list_header
  type:
    string
  used by:
    htsearch
  default:
    <hr noshade size=2>Pages:<br>
  block:
    Global
  version:
    3.0 or later
  description:
    This text will be used as the value of the PAGEHEADER variable, for use in templates or the search_results_footer file, when all search results fit on more than one page.
  example:

    page_list_header:

page_number_separator
  type:
    quoted string list
  used by:
    htsearch
  default:
    " "
  block:
    Global
  version:
    3.1.4 or later
  description:
    The text strings in this list will be used when putting together the PAGELIST variable, for use in templates or the search_results_footer file, when search results fit on more than page. The PAGELIST is the list of links at the bottom of the search results page. The strings in the list will be used in rotation, and will separate individual entries taken from page_number_text and no_page_number_text. There can be as many or as few strings in the list as you like. If there are not enough for the number of pages listed, it goes back to the start of the list. If the list is empty, a space is used. The text strings can contain HTML tags. The strings need to be quoted if they contain spaces, or to specify an empty string.
  example:

    page_number_separator: | "</td> <td>"

page_number_text
  type:
    quoted string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.0 or later
  description:
    The text strings in this list will be used when putting together the PAGELIST variable, for use in templates or the search_results_footer file, when search results fit on more than page. The PAGELIST is the list of links at the bottom of the search results page. There should be as many strings in the list as there are pages allowed by the maximum_page_buttons attribute. If there are not enough, or the list is empty, the page numbers alone will be used as the text for the links. Entries from this list are used for the links to other pages, while an entry from the no_page_number_text list is used for the current page, as the current page is shown in the page list without a hypertext link. The text strings can contain HTML tags to highlight page numbers or embed images. The strings need to be quoted if they contain spaces.
  example:

    page_number_text: | <em>1</em> <em>2</em> \ <em>3</em> <em>4</em> \ <em>5</em> <em>6</em> \ <em>7</em> <em>8</em> \ <em>9</em> <em>10</em>

persistent_connections
  type:
    boolean
  used by:
    htdig
  default:
    true
  block:
    Server
  version:
    3.2.0b1 or later
  description:
    If set to true, when servers make it possible, htdig can take advantage of persistent connections, as defined by HTTP/1.1 (RFC2616). This permits to reduce the number of open/close operations of connections, when retrieving a document with HTTP.
  example:

    persistent_connections: | false

plural_suffix
  type:
    string
  used by:
    htsearch
  default:
    s
  block:
    Global
  version:
    3.2.0b2 or later
  description:
    Specifies the value of the PLURAL_MATCHES template variable used in the header, footer and template files. This can be used for localization for non-English languages where 's' is not the appropriate suffix.
  example:

    plural_suffix: | en

prefix_match_character
  type:
    string
  used by:
    htsearch
  default:
    *
  block:
    Global
  version:
    3.1.0b1 or later
  description:
    A null prefix character means that prefix matching should be applied to every search word. Otherwise prefix matching is done on any search word ending with the characters specified in this string, with the string being stripped off before looking for matches. The "prefix" algorithm must be enabled in search_algorithm for this to work. You may also want to set the max_prefix_matches and minimum_prefix_length attributes to get it working as you want.
    As a special case, in version 3.1.6 and later, if this string is non-null and is entered alone as a search word, it is taken as a wildcard that matches all documents in the database. If this string is null, the wildcard for this special case will be *. This wildcard doesn't require the prefix algorithm to be enabled.
  example:

    prefix_match_character: | ing

prev_page_text
  type:
    string
  used by:
    htsearch
  default:
    [prev]
  block:
    Global
  version:
    3.0 or later
  description:
    The text displayed in the hyperlink to go to the previous page of matches.
  example:

    prev_page_text: | <img src="/htdig/buttonl.gif">

regex_max_words
  type:
    integer
  used by:
    htsearch
  default:
    25
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    The "regex" fuzzy algorithm could potentially match a very large number of words. This value limits the number of words each regular expression can match. Note that this does not limit the number of documents that are matched in any way.
  example:

    regex_max_words: | 10

remove_bad_urls
  type:
    boolean
  used by:
    htpurge
  default:
    true
  block:
    Server
  version:
    all
  description:
    If TRUE, htpurge will remove any URLs which were marked as unreachable by htdig from the database. If FALSE, it will not do this. When htdig is run in initial mode, documents which were referred to but could not be accessed should probably be removed, and hence this option should then be set to TRUE, however, if htdig is run to update the database, this may cause documents on a server which is temporarily unavailable to be removed. This is probably NOT what was intended, so hence this option should be set to FALSE in that case.
  example:

    remove_bad_urls: | true

remove_default_doc
  type:
    string list
  used by:
    htdig
  default:
    index.html
  block:
    Global
  version:
    3.1.0 or later
  description:
    Set this to the default documents in a directory used by the servers you are indexing. These document names will be stripped off of URLs when they are normalized, if one of these names appears after the final slash, to translate URLs like http://foo.com/index.html into http://foo.com/
    Note that you can disable stripping of these names during normalization by setting the list to an empty string. The list should only contain names that all servers you index recognize as default documents for directory URLs, as defined by the DirectoryIndex setting in Apache's srm.conf, for example. This does not apply to file:/// or ftp:// URLS.
    See also local_default_doc.
  example:

    remove_default_doc: | default.html default.htm index.html index.htm

remove_unretrieved_urls
  type:
    boolean
  used by:
    htpurge
  default:
    false
  block:
    Server
  version:
    3.2.0b1 or later
  description:
    If TRUE, htpurge will remove any URLs which were discovered and included as stubs in the database but not yet retrieved. If FALSE, it will not do this. When htdig is run in initial mode with no restrictions on hopcount or maximum documents, these should probably be removed and set to true. However, if you are hoping to index a small set of documents and eventually get to the rest, you should probably leave this as false.
  example:

    remove_unretrieved_urls: | true

restrict
  type:
    pattern list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.2.0b4 or later
  description:
    This specifies a set of patterns that all URLs have to match against in order for them to be included in the search results. Any number of strings can be specified, separated by spaces. If multiple patterns are given, at least one of the patterns has to match the URL. The list can be specified from within the configuration file, and can be overridden with the "restrict" input parameter in the search form. Note that the restrict list does not take precedence over the exclude list - if a URL matches patterns in both lists it is still excluded from the search results.
    To restrict URLs in htdig, use limit_urls_to.
  example:

    restrict: | http://www.acme.com/widgets/

robotstxt_name
  type:
    string
  used by:
    htdig
  default:
    htdig
  block:
    Server
  version:
    3.0.7 or later
  description:
    Sets the name that htdig will look for when parsing robots.txt files. This can be used to make htdig appear as a different spider than ht://Dig. Useful to distinguish between a private and a global index.
  example:

    robotstxt_name: | myhtdig

script_name
  type:
    string
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.4 or later
  description:
    Overrides the value of the SCRIPT_NAME environment attribute. This is useful if htsearch is not being called directly as a CGI program, but indirectly from within a dynamic .shtml page using SSI directives. Previously, you needed a wrapper script to do this, but this configuration attribute makes wrapper scripts obsolete for SSI and possibly for other server scripting languages, as well. (You still need a wrapper script when using PHP, though.)
    Check out the `contrib/scriptname` directory for a small example. Note that this attribute also affects the value of the CGI variable used in htsearch templates.
  example:

    script_name: | /search/results.shtml

search_algorithm
  type:
    string list
  used by:
    htsearch
  default:
    exact:1
  block:
    Global
  version:
    all
  description:
    Specifies the search algorithms and their weight to use when searching. Each entry in the list consists of the algorithm name, followed by a colon (:) followed by a weight multiplier. The multiplier is a floating point number between 0 and 1. Note that depending on your locale setting, and whether your system's locale implementation affects floating point input, you may need to specify the decimal point as a comma rather than a period.
    Note:If the exact method is not listed, the search may not work since the original terms will not be used.
    Current algorithms supported are:
    exact
      The default exact word matching algorithm. This will find only exactly matched words.
    soundex
      Uses a slightly modified soundex algorithm to match words. This requires that the soundex database be present. It is generated with the htfuzzy program.
    metaphone
      Uses the metaphone algorithm for matching words. This algorithm is more specific to the english language than soundex. It requires the metaphone database, which is generated with the htfuzzy program.
    accents
      Uses the accents algorithm for matching words. This algorithm will treat all accented letters as equivalent to their unaccented counterparts. It requires the accents database, which is generated with the htfuzzy program.
    endings
      This algorithm uses language specific word endings to find matches. Each word is first reduced to its word root and then all known legal endings are used for the matching. This algorithm uses two databases which are generated with htfuzzy.
    synonyms
      Performs a dictionary lookup on all the words. This algorithm uses a database generated with the htfuzzy program.
    substring
      Matches all words containing the queries as substrings. Since this requires checking every word in the database, this can really slow down searches considerably.
    prefix
      Matches all words beginning with the query strings. Uses the option prefix_match_character to decide whether a query requires prefix matching. For example "abc*" would perform prefix matching on "abc" since * is the default prefix_match_character.
    regex
      Matches all words that match the patterns given as regular expressions. Since this requires checking every word in the database, this can really slow down searches considerably. The config file used for searching must include the regex meta-characters (^$\[-]|.*) included in extra_word_characters, while the config file used for digging should not.
    speling
      A simple fuzzy algorithm that tries to find one-off spelling mistakes, such as transposition of two letters or an extra character. Since this usually generates just a few possibilities, it is relatively quick.
  example:

    search_algorithm: | exact:1 soundex:0.3

search_results_contenttype
  type:
    string
  used by:
    htsearch
  default:
    text/html
  block:
    Global
  version:
    all
  description:
    This specifies a Content-type to be output as an HTTP header at the start of search results. If set to an empty string, the Content-type header will be omitted altogether.
  example:

    search_results_contenttype: | text/xml

search_results_footer
  type:
    string
  used by:
    htsearch
  default:
    ${common_dir}/footer.html
  block:
    Global
  version:
    all
  description:
    This specifies a filename to be output at the end of search results. While outputting the footer, some variables will be expanded. Variables use the same syntax as the Bourne shell. If there is a variable VAR, the following will all be recognized:
    - $VAR
    - $(VAR)
    - ${VAR}
    The following variables are available. See hts_template.html for a complete list.
    MATCHES
      The number of documents that were matched.
    PLURAL_MATCHES
      If MATCHES is not 1, this will be the string "s", else it is an empty string. This can be used to say something like "$(MATCHES) document$(PLURAL_MATCHES) were found"
    MAX_STARS
      The value of the max_stars attribute.
    LOGICAL_WORDS
      A string of the search words with either "and" or "or" between the words, depending on the type of search.
    WORDS
      A string of the search words with spaces in between.
    PAGEHEADER
      This expands to either the value of the page_list_header or no_page_list_header attribute depending on how many pages there are.
    Note that this file will NOT be output if no matches were found. In this case the nothing_found_file attribute is used instead. Also, this file will not be output if it is overridden by defining the search_results_wrapper attribute.
  example:

    search_results_footer: | /usr/local/etc/ht/end-stuff.html

search_results_header
  type:
    string
  used by:
    htsearch
  default:
    ${common_dir}/header.html
  block:
    Global
  version:
    all
  description:
    This specifies a filename to be output at the start of search results. While outputting the header, some variables will be expanded. Variables use the same syntax as the Bourne shell. If there is a variable VAR, the following will all be recognized:
    - $VAR
    - $(VAR)
    - ${VAR}
    The following variables are available. See hts_template.html for a complete list.
    MATCHES
      The number of documents that were matched.
    PLURAL_MATCHES
      If MATCHES is not 1, this will be the string "s", else it is an empty string. This can be used to say something like "$(MATCHES) document$(PLURAL_MATCHES) were found"
    MAX_STARS
      The value of the max_stars attribute.
    LOGICAL_WORDS
      A string of the search words with either "and" or "or" between the words, depending on the type of search.
    WORDS
      A string of the search words with spaces in between.
    Note that this file will NOT be output if no matches were found. In this case the nothing_found_file attribute is used instead. Also, this file will not be output if it is overridden by defining the search_results_wrapper attribute.
  example:

    search_results_header: | /usr/local/etc/ht/start-stuff.html

search_results_order
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.2.0b2 or later
  description:
    This specifies a list of patterns for URLs in search results. Results will be displayed in the specified order, with the search algorithm result as the second order. Remaining areas, that do not match any of the specified patterns, can be placed by using * as the pattern. If no * is specified, one will be implicitly placed at the end of the list.
    See also url_seed_score.
  example:

    search_results_order: | /docs/|faq.html * /maillist/ /testresults/

search_results_wrapper
  type:
    string
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.0 or later
  description:
    This specifies a filename to be output at the start and end of search results. This file replaces the search_results_header and search_results_footer files, with the contents of both in one file, and uses the pseudo-variable $(HTSEARCH_RESULTS) as a separator for the header and footer sections. If the filename is not specified, the file is unreadable, or the pseudo-variable above is not found, htsearch reverts to the separate header and footer files instead. While outputting the wrapper, some variables will be expanded, just as for the search_results_header and search_results_footer files.
    Note that this file will NOT be output if no matches were found. In this case the nothing_found_file attribute is used instead.
  example:

    search_results_wrapper: | ${common_dir}/wrapper.html

search_rewrite_rules
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    This is a list of pairs, regex replacement, used to rewrite URLs in the search results. The left hand string is a regular expression; the right hand string is a literal string with embedded placeholders for fragments that matched inside brackets in the regular expression. \0 is the whole matched string, \1 to \9 are bracketted substrings. The backslash must be doubled-up in the attribute setting to get past the variable expansion parsing. Rewrite rules are applied sequentially to each URL before it is displayed or checked against the restrict or exclude lists. Rewriting does not stop once a match has been made, so multiple rules may affect a given URL. See also url_part_aliases which allows URLs to be of one form during indexing and translated for results, and url_rewrite_rules which allows URLs to be rewritten while indexing.
  example:

    search_rewrite_rules: | http://(.*)\\.mydomain\\.org/([^/]*) http://\\2.\\1.com \ http://www\\.myschool\\.edu/myorgs/([^/]*) http://\\1.org

server_aliases
  type:
    string list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.1.0b2 or later
  description:
    This attribute tells the indexer that servers have several DNS aliases, which all point to the same machine and are NOT virtual hosts. This allows you to ensure pages are indexed only once on a given machine, despite the alias used in a URL. As shown in the example, the mapping goes from left to right, so the server name on the right hand side is the one that is used. As of version 3.1.3, the port number is optional, and is assumed to be 80 if omitted. There is no easy way to map all ports from one alias to another without listing them all.
  example:

    server_aliases: | foo.mydomain.com:80=www.mydomain.com:80 \ bar.mydomain.com:80=www.mydomain.com:80

server_max_docs
  type:
    integer
  used by:
    htdig
  default:
    -1
  block:
    Server
  version:
    3.1.0b3 or later
  description:
    This attribute tells htdig to limit the dig to retrieve a maximum number of documents from each server. This can cause unusual behavior on update digs since the old URLs are stored alphabetically. Therefore, update digs will add additional URLs in pseudo-alphabetical order, up to the limit of the attribute. However, it is most useful to partially index a server as the URLs of additional documents are entered into the database, marked as never retrieved.
    A value of -1 specifies no limit.
  example:

    server_max_docs: | 50

server_wait_time
  type:
    integer
  used by:
    htdig
  default:
    0
  block:
    Server
  version:
    3.1.0b3 or later
  description:
    This attribute tells htdig to ensure a server has had a delay (in seconds) from the beginning of the last connection. This can be used to prevent "server abuse" by digging without delay. It's recommended to set this to 10-30 (seconds) when indexing servers that you don't monitor yourself. Additionally, this attribute can slow down local indexing if set, which may or may not be what you intended.
  example:

    server_wait_time: | 20

sort
  type:
    string
  used by:
    htsearch
  default:
    score
  block:
    Global
  version:
    3.1.0 or later
  description:
    This is the default sorting method that htsearch uses to determine the order in which matches are displayed. The valid choices are:

    score time title | revscore revtime revtitle

    This attribute will only be used if the HTML form that calls htsearch didn't have the sort value set. The words date and revdate can be used instead of time and revtime, as both will sort by the time that the document was last modified, if this information is given by the server. The default is to sort by the score, which ranks documents by best match. The sort methods that begin with "rev" simply reverse the order of the sort. Note that setting this to something other than "score" will incur a slowdown in searches.
  example:

    sort: | revtime

sort_names
  type:
    quoted string list
  used by:
    htsearch
  default:
    score Score time Time title Title revscore 'Reverse Score' revtime 'Reverse Time' revtitle 'Reverse Title'
  block:
    Global
  version:
    3.1.0 or later
  description:
    These values are used to create the sort menu. It consists of pairs. The first element of each pair is one of the known sort methods, the second element is the text that will be shown in the menu for that sort method. This text needs to be quoted if it contains spaces. See the select list documentation for more information on how this attribute is used.
  example:

    sort_names: | score 'Best Match' time Newest title A-Z \ revscore 'Worst Match' revtime Oldest revtitle Z-A

soundex_db
  type:
    string
  used by:
    htfuzzy, htsearch
  default:
    ${database_base}.soundex.db
  block:
    Global
  version:
    all
  description:
    The database file used for the fuzzy "soundex" search algorithm. This database is created by htfuzzy and used by htsearch.
  example:

    soundex_db: | ${database_base}.snd.db

star_blank
  type:
    string
  used by:
    htsearch
  default:
    ${image_url_prefix}/star_blank.gif
  block:
    Global
  version:
    all
  description:
    This specifies the URL to use to display a blank of the same size as the star defined in the star_image attribute or in the star_patterns attribute.
  example:

    star_blank: | http://www.somewhere.org/icons/noelephant.gif

star_image
  type:
    string
  used by:
    htsearch
  default:
    ${image_url_prefix}/star.gif
  block:
    Global
  version:
    all
  description:
    This specifies the URL to use to display a star. This allows you to use some other icon instead of a star. (We like the star...)
    The display of stars can be turned on or off with the use_star_image attribute and the maximum number of stars that can be displayed is determined by the max_stars attribute.
    Even though the image can be changed, the ALT value for the image will always be a '*'.
  example:

    star_image: | http://www.somewhere.org/icons/elephant.gif

star_patterns
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.0 or later
  description:
    This attribute allows the star image to be changed depending on the URL or the match it is used for. This is mainly to make a visual distinction between matches on different web sites. The star image could be replaced with the logo of the company the match refers to.
    It is advisable to keep all the images the same size in order to line things up properly in a short result listing.
    The format is simple. It is a list of pairs. The first element of each pair is a pattern, the second element is a URL to the image for that pattern.
  example:

    star_patterns: | http://www.sdsu.edu /sdsu.gif \ http://www.ucsd.edu /ucsd.gif

startday
  type:
    integer
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    Day component of first date allowed as last-modified date of returned docutments. This is most usefully specified as a GCI argument. See also startyear.
  example:

    startday: | 1

start_ellipses
  type:
    string
  used by:
    htsearch
  default:
    <strong><code>... </code></strong>
  block:
    Global
  version:
    all
  description:
    When excerpts are displayed in the search output, this string will be prepended to the excerpt if there is text before the text displayed. This is just a visual reminder to the user that the excerpt is only part of the complete document.
  example:

    start_ellipses: | ...

start_highlight
  type:
    string
  used by:
    htsearch
  default:
    <strong>
  block:
    Global
  version:
    3.1.4 or later
  description:
    When excerpts are displayed in the search output, matched words will be highlighted using this string and end_highlight. You should ensure that highlighting tags are balanced, that is, any formatting tags that this string opens should be closed by end_highlight.
  example:

    start_highlight: | <font color="#FF0000">

startmonth
  type:
    integer
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    Month component of first date allowed as last-modified date of returned docutments. This is most usefully specified as a GCI argument. See also startyear.
  example:

    startmonth: | 1

start_url
  type:
    string list
  used by:
    htdig
  default:
    http://www.htdig.org/
  block:
    Global
  version:
    all
  description:
    This is the list of URLs that will be used to start a dig when there was no existing database. Note that multiple URLs can be given here.
    Note also that the value of start_url will be the default value for limit_urls_to, so if you set start_url to the URLs for specific files, rather than a site or subdirectory URL, you may need to set limit_urls_to to something less restrictive so htdig doesn't reject links in the documents.
  example:

    start_url: | http://www.somewhere.org/alldata/index.html

startyear
  type:
    integer
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.6 or later
  description:
    This specifies the year of the cutoff start date for search results. If the start or end date are specified, only results with a last modified date within this range are shown. If a start or end date is specified, but startyear is not, then it defaults to 1970. See also startday, startmonth, endday, endmonth, endyear. These are most usefully specified as a GCI argument.
    For each component, if a negative number is given, it is taken as relative to the current date. Relative days can span several months or even years if desired, and relative months can span several years. A startday of -90 will select matching documents modified within the last 90 days.
  example:

    startyear: | 2001

store_phrases
  type:
    boolean
  used by:
    htdig
  default:
    true
  block:
    Global
  version:
    3.2.0b5 or later
  description:
    Causes htdig to record all occurrences of each word in a document, to allow accurate phrase searches. If this is false, only the first occurrence of each word will be stored, causing many phrases to be missed. Setting this false increases indexing speed by about 20%, and reduces disk requirements by about 60%.
  example:

    No example provided

substring_max_words
  type:
    integer
  used by:
    htsearch
  default:
    25
  block:
    Global
  version:
    3.0.8b1 or later
  description:
    The Substring fuzzy algorithm could potentially match a very large number of words. This value limits the number of words each substring pattern can match. Note that this does not limit the number of documents that are matched in any way.
  example:

    substring_max_words: | 100

synonym_db
  type:
    string
  used by:
    htsearch, htfuzzy
  default:
    ${common_dir}/synonyms.db
  block:
    Global
  version:
    3.0 or later
  description:
    Points to the database that htfuzzy creates when the synonyms algorithm is used.
    htsearch uses this to perform synonym dictionary lookups.
  example:

    synonym_db: | ${database_base}.syn.db

synonym_dictionary
  type:
    string
  used by:
    htfuzzy
  default:
    ${common_dir}/synonyms
  block:
    Global
  version:
    3.0 or later
  description:
    This points to a text file containing the synonym dictionary used for the synonyms search algorithm.
    Each line of this file has at least two words. The first word is the word to replace, the rest of the words are synonyms for that word.
  example:

    synonym_dictionary: | /usr/dict/synonyms

syntax_error_file
  type:
    string
  used by:
    htsearch
  default:
    ${common_dir}/syntax.html
  block:
    Global
  version:
    all
  description:
    This points to the file which will be displayed if a boolean expression syntax error was found.
  example:

    syntax_error_file: | ${common_dir}/synerror.html

tcp_max_retries
  type:
    integer
  used by:
    htdig
  default:
    1
  block:
    Server
  version:
    3.2.0b1 or later
  description:
    This option set the maximum number of attempts when a connection timeouts. After all these retries, the connection attempt results .
  example:

    tcp_max_retries: | 6

tcp_wait_time
  type:
    integer
  used by:
    htdig
  default:
    5
  block:
    Server
  version:
    3.2.0b1 or later
  description:
    This attribute sets the wait time (in seconds) after a connection fails and the timeout is raised.
  example:

    tcp_wait_time: | 10

template_map
  type:
    quoted string list
  used by:
    htsearch
  default:
    Long builtin-long builtin-long Short builtin-short builtin-short
  block:
    Global
  version:
    3.0 or later
  description:
    This maps match template names to internal names and template file names. It is a list of triplets. The first element in each triplet is the name that will be displayed in the FORMAT menu. The second element is the name used internally and the third element is a filename of the template to use.
    There are two predefined templates, namely builtin-long and builtin-short. If the filename is one of those, they will be used instead.
    More information about templates can be found in the htsearch documentation. The particular template is selecterd by the format cgi argument, and the default is given by template_name in the config file.
  example:

    template_map: | Short short ${common_dir}/short.html \ Normal normal builtin-long \ Detailed detail ${common_dir}/detail.html

template_name
  type:
    string
  used by:
    htsearch
  default:
    builtin-long
  block:
    Global
  version:
    3.0 or later
  description:
    Specifies the default template if no format field is given by the search form. This needs to map to the template_map.
  example:

    template_name: | long

template_patterns
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.1.4 or later
  description:
    This attribute allows the results template to be changed depending on the URL or the match it is used for. This is mainly to make a visual distinction between matches on different web sites. The results for each site could thus be shown in a style matching that site.
    The format is simply a list of pairs. The first element of each pair is a pattern, the second element is the name of the template file for that pattern.
    More information about templates can be found in the htsearch documentation.
    Normally, when using this template selection method, you would disable user selection of templates via the format input parameter in search forms, as the two methods were not really designed to interact. Templates selected by URL patterns would override any user selection made in the form. If you want to use the two methods together, see the notes on combining them for an example of how to do this.
  example:

    template_patterns: | http://www.sdsu.edu ${common_dir}/sdsu.html \ http://www.ucsd.edu ${common_dir}/ucsd.html

text_factor
  type:
    number
  used by:
    htsearch
  default:
    1
  block:
    Global
  version:
    3.0 or later
  description:
    This is a factor which will be used to multiply the weight of words that are not in any special part of a document. Setting a factor to 0 will cause normal words to be ignored. The number may be a floating point number. See also the heading_factor attribute.
  example:

    text_factor: | 0

timeout
  type:
    integer
  used by:
    htdig
  default:
    30
  block:
    Server
  version:
    all
  description:
    Specifies the time the digger will wait to complete a network read. This is just a safeguard against unforeseen things like the all too common transformation from a network to a notwork.
    The timeout is specified in seconds.
  example:

    timeout: | 42

title_factor
  type:
    number
  used by:
    htsearch
  default:
    100
  block:
    Global
  version:
    all
  description:
    This is a factor which will be used to multiply the weight of words in the title of a document. Setting a factor to 0 will cause words in the title to be ignored. The number may be a floating point number. See also the heading_factor attribute.
  example:

    title_factor: | 12

translate_latin1
  type:
    boolean
  used by:
    htdig, htsearch
  default:
    true
  block:
    Global
  version:
    3.2.0b5 or later
  description:
    If set to false, the SGML entities for ISO-8859-1 (or Latin 1) characters above &nbsp; (or &#160;) will not be translated into their 8-bit equivalents. This attribute should be set to false when using a locale that doesn't use the ISO-8859-1 character set, to avoid these entities being mapped to inappropriate 8-bit characters, or perhaps more importantly to avoid 8-bit characters from your locale being mapped back to Latin 1 SGML entities in search results.
  example:

    translate_latin1: | false

url_list
  type:
    string
  used by:
    htdig
  default:
    ${database_base}.urls
  block:
    Global
  version:
    all
  description:
    This file is only created if create_url_list is set to true. It will contain a list of all URLs that were seen.
  example:

    url_list: | /tmp/urls

url_log
  type:
    string
  used by:
    htdig
  default:
    ${database_base}.log
  block:
    Global
  version:
    3.1.0 or later
  description:
    If htdig is interrupted, it will write out its progress to this file. Note that if it has a large number of URLs to write, it may take some time to exit. This can especially happen when running update digs and the run is interrupted soon after beginning.
  example:

    url_log: | /tmp/htdig.progress

url_part_aliases
  type:
    string list
  used by:
    all
  default:
    No default
  block:
    Global
  version:
    3.1.0 or later
  description:
    A list of translations pairs from and to, used when accessing the database. If a part of an URL matches with the from-string of each pair, it will be translated into the to-string just before writing the URL to the database, and translated back just after reading it from the database.
    This is primarily used to provide an easy way to rename parts of URLs for e.g. changing www.example.com/~htdig to www.htdig.org. Two different configuration files for digging and searching are then used, with url_part_aliases having different from strings, but identical to-strings.
    See also common_url_parts.
    Strings that are normally incorrect in URLs or very seldom used, should be used as to-strings, since extra storage will be used each time one is found as normal part of a URL. Translations will be performed with priority for the leftmost longest match. Each to-string must be unique and not be a part of any other to-string. It also helps to keep the to-strings short to save space in the database. Other than that, the choice of to-strings is pretty arbitrary, as they just provide a temporary, internal encoding in the databases, and none of the characters in these strings have any special meaning.
    Note that when this attribute is changed, the database should be rebuilt, unless the effect of "moving" the affected URLs in the database is wanted, as described above.
    Please note: Don't just copy the example below into a single configuration file. There are two separate settings of url_part_aliases below; the first one is for the configuration file to be used by htdig, htmerge, and htnotify, and the second one is for the configuration file to be used by htsearch. In this example, htdig will encode the URL "http://search.example.com/~htdig/contrib/stuff.html" as "*sitecontrib/stuff*2" in the databases, and htsearch will decode it as "http://www.htdig.org/contrib/stuff.htm".
    As of version 3.1.6, you can also do more complex rewriting of URLs using url_rewrite_rules and search_rewrite_rules.
  example:

    url_part_aliases: | http://search.example.com/~htdig *site \ http://www.htdig.org/this/ *1 \ .html *2
    url_part_aliases: | http://www.htdig.org/ *site \ http://www.htdig.org/that/ *1 \ .htm *2

url_rewrite_rules
  type:
    string list
  used by:
    htdig
  default:
    No default
  block:
    Global
  version:
    3.2.0b3 or later
  description:
    This is a list of pairs, regex replacement used to permanently rewrite URLs as they are indexed. The left hand string is a regular expression; the right hand string is a literal string with embedded placeholders for fragments that matched inside brackets in the regex. \0 is the whole matched string, \1 to \9 are bracketted substrings. Note that the entire URL is replaced by the right hand string (not just the portion which matches the left hand string). Thus, a leading and trailing (.*) should be included in the pattern, with matching placeholders in the replacement string.
    Rewrite rules are applied sequentially to each incoming URL before normalization occurs. Rewriting does not stop once a match has been made, so multiple rules may affect a given URL. See also url_part_aliases which allows URLs to be of one form during indexing and translated for results.
  example:

    url_rewrite_rules: | (.*)\\?JServSessionIdroot=.* \\1 \ (.*)\\&JServSessionIdroot=.* \\1 \ (.*)&context=.* \\1

url_seed_score
  type:
    string list
  used by:
    htsearch
  default:
    No default
  block:
    Global
  version:
    3.2.0b2 or later
  description:
    This is a list of pairs, pattern formula, used to weigh the score of hits, depending on the URL of the document.
    The pattern part is a substring to match against the URL. Pipe ('|') characters can be used in the pattern to concatenate substrings for web-areas that have the same formula.
    The formula describes a factor and a constant, by which the hit score is weighed. The factor part is multiplied to the original score, then the constant part is added.
    The format of the formula is the factor part: "*N" optionally followed by comma and spaces, followed by the constant part : "+M", where the plus sign may be emitted for negative numbers. Either part is optional, but must come in this order.
    The numbers N and M are floating point constants.
    More straightforward is to think of the format as "newscore = oldscore*N+M", but with the "newscore = oldscore" part left out.
  example:

    url_seed_score: | /mailinglist/ *.5-1e6 /docs/|/news/ *1.5 /testresults/ "*.7 -200" /faq-area/ *2+10000

url_text_factor
  type:
    number
  used by:
    htsearch
  default:
    1
  block:
    Global
  version:
    ??
  description:
    TO BE COMPLETED
    See also heading_factor.
  example:

    url_text_factor: | 1

use_doc_date
  type:
    boolean
  used by:
    htdig
  default:
    false
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    If set to true, htdig will use META date tags in documents, overriding the modification date returned by the server. Any documents that do not have META date tags will retain the last modified date returned by the server or found on the local file system. As of version 3.1.6, in addition to META date tags, htdig will also recognize dc.date, dc.date.created and dc.date.modified.
  example:

    use_doc_date: | true

use_meta_description
  type:
    boolean
  used by:
    htsearch
  default:
    false
  block:
    Global
  version:
    3.1.0b1 or later
  description:
    If set to true, any META description tags will be used as excerpts by htsearch. Any documents that do not have META descriptions will retain their normal excerpts.
  example:

    use_meta_description: | true

use_star_image
  type:
    boolean
  used by:
    htsearch
  default:
    true
  block:
    Global
  version:
    all
  description:
    If set to true, the star_image attribute is used to display upto max_stars images for each match.
  example:

    use_star_image: | no

user_agent
  type:
    string
  used by:
    htdig
  default:
    htdig
  block:
    Server
  version:
    3.1.0b2 or later
  description:
    This allows customization of the user_agent: field sent when the digger requests a file from a server.
  example:

    user_agent: | htdig-digger

valid_extensions
  type:
    string list
  used by:
    htdig
  default:
    No default
  block:
    URL
  version:
    3.1.4 or later
  description:
    This is a list of extensions on URLs which are the only ones considered acceptable. This list is used to supplement the MIME-types that the HTTP server provides with documents. Some HTTP servers do not have a correct list of MIME-types and so can advertise certain documents as text while they are some binary format. If the list is empty, then all extensions are acceptable, provided they pass other criteria for acceptance or rejection. If the list is not empty, only documents with one of the extensions in the list are parsed. See also bad_extensions.
  example:

    valid_extensions: | .html .htm .shtml

valid_punctuation
  type:
    string
  used by:
    htdig, htsearch
  default:
    .-_/!#\$%^&'
  block:
    Global
  version:
    all
  description:
    This is the set of characters which may be deleted from the document before determining what a word is. This means that if a document contains something like `half-hearted` the digger will see this as the three words `half`, `hearted` and `halfhearted`.
    These characters are also removed before keywords are passed to the search engine, so a search for "half-hearted" works as expected.
    Note that the dollar sign ($) and backslash (\) must be escaped by a backslash in both valid_punctuation and extra_word_characters. Moreover, the backslash should not be the last character on the line. There is currently no way to include a back-quote (`) in extra_word_characters or valid_punctuation.
    See also the extra_word_characters and allow_numbers attributes.
  example:

    valid_punctuation: | -'

version
  type:
    string
  used by:
    htsearch
  default:
    3.2.0b6
  block:
    Global
  version:
    all
  description:
    This specifies the value of the VERSION variable which can be used in search templates. The default value of this attribute is determined at compile time, and will not normally be set in configuration files.
  example:

    version: | 3.2.0

word_db
  type:
    string
  used by:
    all
  default:
    ${database_base}.words.db
  block:
    Global
  version:
    all
  description:
    This is the main word database. It is an index of all the words to a list of documents that contain the words. This database can grow large pretty quickly.
  example:

    word_db: | ${database_base}.allwords.db

word_dump
  type:
    string
  used by:
    htdig, htdump, htload
  default:
    ${database_base}.worddump
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This file is basically a text version of the file specified in word_db. Its only use is to have a human readable database of all words. The file is easy to parse with tools like perl or tcl.
  example:

    word_dump: | /tmp/words.txt

wordlist_cache_inserts
  type:
    boolean
  used by:
    ???
  default:
    false
  block:
    Global
  version:
    ???
  description:
    If true, create a cache of size wordlist_cache_size/2 for class WordListOne. I don't know what this is for. Does anyone?
  example:

    wordlist_cache_inserts: | true

wordlist_cache_size
  type:
    integer
  used by:
    all
  default:
    10000000
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    Size (in bytes) of memory cache used by Berkeley DB (DB used by the indexer) IMPORTANT: It makes a huge difference. The rule is that the cache size should be at least 2% of the expected index size. The Berkeley DB file has 1% of internal pages that must be cached for good performances. Giving an additional 1% leaves room for caching leaf pages.
  example:

    wordlist_cache_size: | 40000000

wordlist_compress
  type:
    boolean
  used by:
    all
  default:
    true
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    Enables or disables the default compression system for the indexer. This currently attempts to compress the index by a factor of 8. If the Zlib library is not found on the system, the default is false.
  example:

    wordlist_compress: | false

wordlist_compress_zlib
  type:
    boolean
  used by:
    all
  default:
    true
  block:
    Global
  version:
    3.2.0b4 or later
  description:
    Enables or disables the zlib compression system for the indexer. Both wordlist_compress and compression_level must be true (non-zero) to use this option!
  example:

    wordlist_compress_zlib: | false

wordlist_monitor
  type:
    boolean
  used by:
    all
  default:
    false
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    This enables monitoring of what's happening in the indexer. It can help to detect performance/configuration problems.
  example:

    wordlist_monitor: | true

wordlist_monitor_period
  type:
    number
  used by:
    all
  default:
    0
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    Sets the number of seconds between each monitor output.
  example:

    wordlist_monitor_period: | .1

wordlist_monitor_output
  type:
    string
  used by:
    all
  default:
    No default
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    Print monitoring output on file instead of the default stderr.
  example:

    wordlist_monitor_output: | myfile

wordlist_page_size
  type:
    integer
  used by:
    all
  default:
    0
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    Size (in bytes) of pages used by Berkeley DB (DB used by the indexer). Must be a power of two.
  example:

    wordlist_page_size: | 8192

wordlist_verbose
  type:
    integer
  used by:
  default:
    No default
  block:
    Global
  version:
  description:
    wordlist_verbose 1 walk logic
    wordlist_verbose 2 walk logic details
    wordlist_verbose 2 walk logic lots of details
  example:

    wordlist_verbose: | true

wordlist_wordkey_description
  type:
    string
  used by:
    all
  default:
    Word/DocID 32/Flags 8/Location 16
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    Internal key description: *not user configurable*
  example:

    No example provided

wordlist_wordrecord_description
  type:
    string
  used by:
    all
  default:
    DATA
  block:
    Global
  version:
    3.2.0b1 or later
  description:
    Internal data description: *not user configurable*
  example:

    No example provided

Last modified: Sat Jun 12 23:26:34 EST 2004